All variants out of stock
The Edelrid Radialis Comp II is a classic full body harness with a step in design. The harness is easy to put on and take off thanks to six Easy Glider buckles.
Features:Stitched webbing terminations designed so that straps cannot be completely unthreadedDifferent colours for easy size identification (icemint, oasis)Tarp patch to write on for labelling harnessesAdjustable leg loops for optimum fit and full flexibilitySmall pouch on harness to accommodate an RFID tagElasticated loops hold remainder of straps in placeCentral D-ring for attaching a lanyardGear loop for storing additional equipmentDifferent webbing design simplifies the distinction of chest harness, sit harness and leg loops
Specifications:max. leg loop circumference: 85 cmmin. leg loop circumference: 25 cmmax. waist size: 140 cmmin. waist size: 45 cmUIAACertification: EN 12277 Typ AMaterial: PolyamideFall Arrest Eyelet Front: YesUIAA: Yes
The Edelrid Radialis Comp III is a classic webbing full-body harness for use on high rope courses and adventure parks. The shoulder, hip and leg straps are colour coded to make the harness easy to adjust and put on, this also helps instructors to quickly and reliably check the harness before use. There are then size Slide Block buckles and pull-on loops at the end of the webbing, enabling optimum fit. The labelling field and integrated RFID transponder can be used to personalize the harness and make it far easier to document its use.
The Beal Hero Pro is a comfortable, ergonomic fall arrest safety harness that allows all workers at height to work in optimal conditions. It has an X-shaped design on the shoulder straps that ensure a great load distribution.
The Beal Solace is a harness designed specifically for work positioning, suspensions and fall arrest/rope access. This is a comfortable harness with y-shaped straps to allow for better positioning of the dorsa attachment point.
The Petzl Astro Bod Fast is a rope access harness with integrated Croll and gated ventral attachment points. The harness includes six gear loops, two slots for a Caritool (or other tool holders), and two reinforced tool loops.
Petzl's Newton fall arrest harness is designed to interact with various components for work positioning and confined space access. Rear, front, and shoulder attachments are possible. This harness is lightweight, ergonomic and offers immediate access to tools, thanks to its equipment loops for the Toolbag pouch. Conforms to EN361.
The Petzl Newton (Easy Fit) is a comfortable and ergonomic fall arrest harness that can be put on quickly when it needs to be used. It has padded shoulder straps and Fast LT buckles on the leg loops, allowing the harness to be donned with both feet still on the ground and without loss of adjustment.
The Petzl Swan Easyfit Steel is an easy to use full body harness for use in adventure parks. This harness has colour coded straps and a Fast LT Pin-Lock buckle to secure the harness, the Pin-Lock locking system can only be opened by the guide with a special tool.
The Petzl Volt is a fall-arrest and work positioning harness with attachment point for vertical progression on rail or cable-based fall protection system. Thanks to the Fast LT Plus and Fast LT buckles this harness allows it to be donned with both feet on the ground. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes