The Monitor fall arrester has a swivelling side plate for ease of installation on the rope and to limit wear and tear. A lateral brake converts the Monitor into a rope clamp for work positioning. It can also easily follow the operator both up and down and lock in the event of a fall.
The DMM Buddy is a fall arrest device designed for backup in industrial access situations. It's very easy to use and install on rope, providing essential safety backup.
The Rocker by ISC can be fitted to the rope at any point and can be used hands-free as a self-tailing device when travelling up or down the rope. The Rocker is designed for use without a shock-absorber and can be used as a Rope Adjuster or on a work positioning lanyard/Flipline, (In accordance with EN358).
The Petzl Absorbica is a compact energy absorber, for use in combination with a Jane lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a zippered fabric pouch, the energy absorber is protected from abrasion while allowing for regular inspection. It has two options for installation on the harness according to the frequency of manipulation.
The Petzl ASAP is a mobile fall arrest device with a unique locking system, an essential for anyone working at height. The ASAP will follow the user along the rope without any manual intervention, and in the event of sudden acceleration the ASAP will lock on the rope and stop the user. The ASAP is easily attachable and removable making it simple but effective for users.
The ASAP LOCK is a mobile fall arrest device with the added function of a lock. The lock allows the user to immobilize the device to reduce the length of a fall. As with the Petzl ASAP, the ASAP Lock locks on the rope when it is shock loaded, stopping the user from falling any further. The connection arm makes the system loss-resistant when passing intermediate anchors. Please note, the ASAP LOCK must be used with an energy absorbing lanyard to work at a distance from the rope.
The Petzl ASAP'Sorber works in conjunction with the Petzl ASAP or ASAP Lock, it's designed to rip along the stitching during a fall. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.
The Petzl Asap'sorber Axessis an energy absorber to be used to connect the ASAP or ASAP LOCK to the harness. It allows the user to keep the rope at a distance which can be useful to declutter the work area and keep the line away from sharp tools or hot metal. The fall absorption properties come from the tearing of stitches in the webbing reducing the impact force on the user.
The Cabloc can be permanently installed to a ladder or other vertical structure. Components are available in either stainless or galvanised steel options. For use with 8mm 6 x 19 galvanised cable and 8mm 7 x 19 stainless steel cable.