Beal

Designed to protect items inside the Genuis Bucket Plus from bad weather, dust etc.Fitted using clips. Can be used with the Genuis Bucket Plus (also stocked on this website), and designed to protect the contents of the bucket from rain, sleet, other bad weather, dust etc... Also works well to keep the items held within the bag when transporting or hauling.

The Beal Commande bag is designed to hold small ropes and cords so has a small capacity. Made of resistant PVC, its bottom mesh helps gear dry. It also has an eyelet for attachment and a shoulder strap for carrying it.

The Beal DynaConnexion is a dynamic rope sling with sewn endings for use in big wall climbing and mountaineering. It has been developed by André Laperriere of the Mountain and Rock Climbing Federation of Quebec, it has a breaking load 22 kN and its seams are protected by a thermo-retractable sheath. The DynaConnexion is perfect for use on long routes or in mountaineering to shortlink into the belay, to facilitate rappelling or to extend a runner whilst climbing.

The Beal DynaDoubleclip is a double dynamic rope lanyard with sewn endings for belaying and rappelling during big wall climbing and mountaineering. For added safety and durability, its seams are protected by a moulded sheath. It is lightweight, compact and is great for facilitating manoeuvres when rappelling, climbing or mountaineering.

The Beal Dynaloop is a dynamic rope sling that measures 8.3mm in diameter. Reaching the EN 566 standard, it can be used for equalising a belay, clipping in, or extending an anchor point. The benefit of using rope slings over webbing is that the core is protected from UV and abrasion damage by the outer sheath.

The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.

The Beal Dyneema Cord 5.5mm is lighter than normal accessory cord, it can be used as a fixed line due to higher strengths than normal cord of similar diameter, but be aware that it has a low melting point so we don't recommend it for rethreading hexes etc.

The Beal Flat Link has been designed to go with the Hold Up harness and is a fully rated karabiner, making it ideal for full body harnesses. The flat surfaces ensure an even load distribution on webbing.