What’s so special about this case?
It allows you to get photos when it’s really wet. And yes, even underwater!
It features a tough acrylic lens for top-quality photos and extra protection
It’s sand-proof as well as waterproof so you can take your camera safely to the beach (Sand destroys even more cameras than water)
It comes supplied with 3 desiccant sachets to absorb condensation in humid climates.
What else do I need to know?
Your camera should float in this case – but make sure you test yours in a basin before you launch it into the sea!
Note: the lens on the case is permanently attached – do not attempt to remove!
You’ll get a couple of inches of zoom with this case.
Is this the right size for my camera?
This case was designed for small digital compacts with optical zoom. Your zoom lens must have a diameter of less than 40mm/1.57in to fit.
How waterproof is it?
Submersible – protected against continuous immersion to a depth of 30ft/10m
Specifications:
Colour: Cool grey with acid green lanyard
Materials: TPU with optically-clear acrylic lens
Weight: Case: 2.2oz / 63g Lanyard: 0.2oz / 7g
Country of Origin: Made in the UK.
Features:
This case is 100% PVC-free. It is made of a special TPU which is thin enough for you to operate your camera through, but still remarkably strong.
The seams are high-frequency welded to form a super-strong bond.
The Aquaclip® seal opens and closes with a quick twist of two levers. And everything stays in one piece even when it’s open.!
Caution: It’s not foolproof. If you’re not careful you could get a hole in the case, or let water in when opening it. But as long as you treat it sensibly and carefully it should give you many years of use.
It’s supplied with 3 desiccant sachets to absorb condensation in humid climates but we recommend you order extras – see Accessories.
Do please check out the Instructions for Use and Care (see below).