Single

The Petzl Pro Traxion is designed for hauling heavy loads with maximum efficiency and is ideal for big wall climbing and rescue. Designed for aid climbing and mountaineering the Pro Traxion is also good for multi-pitch climbing and caving. The Pro Traxion can also be used in the creation of other hauling systems.

The ISC Aluminium Prussik Pulley (13mm) with roller bearings is ideal for low loads at high speeds and has tamper-proof rivets, in compliance with CE EN12278 (2007) & NFPA (1983)*.

The ISC Stainless Steel Prussik Pulley is a medium pulley that's compatible with 16mm lines. It features a polished stainless steel body with anodised aluminium pulley wheels.

The Petzl Rescue pulley is very strong and efficient making it ideal for rescue, hauling heavy loads and intensive use. The Rescue pulley has a large diameter sheave mounted on sealed ball bearings which provides excellent efficiency. The Rescue pulley accepts up to three carabiners at once to facilitate rope manoeuvres.

The Petzl Mini Traxion is an openable progress-capture pulleys that's been designed for use in hauling and rescue situations. This high-efficiency device allows rope to be installed while the pulley is connected to the anchor. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency (93%), whilst the cam can be locked in the open position so the device can be used as a simple pulley.

The DMM Revolver Rig is a connector with an integrated pulley sheave. Featuring a high efficiency roller bearing sheave(s), a threaded removable captive bar and a full strength textile friendly becket. The uniquely profiled spine and captive bar aid in maintaining correct orientation. The design of the Revolver Rig is such that when using a connector attached to the becket, any friction between the connector and rope is minimised.

The DMM Impact Blocks are designed to be used in industries where loads may be dropped onto rigging with considerable impact forces. The combination of high quality materials and advanced production processes ensures a rope friendly, durable and robust block that looks great and performs even better.

The Petzl Nano Traxion is an ultra-lightweight (53g) and compact progress-capture pulley designed for rescue situations. It's sealed ball bearings provide excellent efficiency.

The DMM Impact Blocks are designed to be used in industries where loads may be dropped onto rigging with considerable impact forces. The combination of high quality materials and advanced production processes ensures a rope friendly, durable and robust block that looks great and performs even better.

The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on thier way around a High Ropes/Challenge course. It is also a protection solution for workers on towers, masts, Wind Turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working.

The Heightec Aluminium Rescue Pulley is a lightweight, compact swing cheek pulley for general or personal use. It features anodised aluminium alloy side plates for corrosion resistance and a nylon pulley wheel. Suitable for use with 13mm diametre or smaller rope.

The Petzl Partner is a compact pulley with swinging side plates. It's both light and compact, yet still ensures excellent efficiency thanks to its aluminium sheave mounted on sealed ball bearings.

The Beal Transf'air Mini is a compact and lightweight pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency.

The Beal Transf'air Fixe is compact and lightweight pulley with fixed side plates. It features a stainless steel axle and washer and the sheave is mounted onto a bronze collar to promote a good level of efficiency.

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.