HMS

The Edelrid HMS Bulletproof Belay FG Eco is a trend-setting belay carabiner with innovative locking mechanism, steel insert in the apex and without anodization. The integrated spring bar reliably prevents the carabiner from twisting in the tie-in loop to eliminate the risk of cross loading. In addition, the bar can only be opened if pressed from above, preventing the tie-in loop from accidentally changing position. Thanks to the compact design and slide gate closure, however this karabiner still has a slender profile and can be operated one-handed.

The Mammut Smart HMS 2.0 Screwgate Carabiner offers the same double safety and easy handling as the older version. The screw locking can be operated only when the safety gate is open. Accidental opening is excluded, as well as unintentional twisting of the carabiner in the belay loop of the climbing harness. This prevents dangerous lateral loading. Mammut recommends use of the Smart HMS 2.0 carabiner for the Smart 2.0 belay device.

The DMM Shadow HMS is a large, but lightweight HMS karabiner with a short gate to maximise gate opening. The deep and wide top basket can take three clove hitches (<9.5mm rope).

The DMM Phantom HMS is an extremely compact and lightweight, yet strong karabiner with an optimised rope bearing surface that's ideally suited for belaying and rigging. The extra-short gate and slim tapering nose can easily take clove hitches and clipping slings.

The DMM 30kN Boa HMS Keylock is the heavier duty version of the 25kN Boa, it is hot forged from 14mm bar which gives it the 30kN major axis rescue that's required for rescue loads. Its ergonomics ensure that it is still easily operated whilst wearing gloves and the curved basket copes with even the busiest rigging set ups, allowing devices to settle comfortably.

The Beal Orient Express is a unidirectional locking carabiner designed for use with belay devices. Thanks to the internal snap gate that clips onto a harness belay loop, the carabiner cannot turn over. This ensures the carabiner stays in the correct direction thus reducing the risk of the belay system being weakened through cross loading.

The Beal Be Lock is a large HMS carabiner designed for easy use with double (halves and twins) rope systems. The large surface area provides easy control in all weather. The Be Lock is particularly suitable for HMS belays and double rope manoeuvres, such as capstan or half-capstan.

The Beal Be Safe is a HMS screwlock karabiner that's perfect for use with belay devices as it can accommodate two ropes at once, without the risk of them becoming overlapped in the event of a fall. The reception cradle ensures that the two ropes slide together and does not generate friction on the sides of the carabiner when the rope is braked. This is true whether rappelling or stopping a fall.

The Petzl Attache is a lightweight and compact, pear-shaped karabiner with as screw gate opening. It has multiple uses for belaying, such as connecting a belay system to a harness and belaying with a Munter hitch. It has a H-cross section to reduce weight, as well as the keylock system to avoid the karabiner snagging during manoeuvres.

The OCUN Condor HMS is a large karabiner that responds to the new trends of safety. Equipped with an independent internal wire gate that prevents it from rotating and guards against unwanted release from a belay loop, this karabiner ensures safe belaying and rappelling. The internal gate locks in the right direction and therefore prevents upward release. This means that the belayer can focus their full attention on the climber. The Condor brings a new level of safety into belaying.

The Petzl William is a large carabiner can be useful in many places. This William's shape and size means it's useful for belaying and abseiling with an Italian hitch with both single or double ropes, anchoring multiple ropes and slings and keeping the belay station organized.

The DMM Rhino karabiner is not restricted to assisted locking belay devices: it works brilliantly with standard devices. The full cross section of the top bar means greater wear resistance, and smooth operation in guide mode usage. The horn makes identification by feel on the rear gear loop easier, and the clean nose design provides snag-free loading and unloading of ropes. The big burly top bar is contrasted by our signature I-Beam construction on the non-rope bearing surfaces resulting in a total weight of 72g.

The DMM Ceros has been designed to help minimise the risk of cross-loading with its internal wire-gate that will keep the karabiner captive on the belay loop. The wire gate opens onto the belay loop in a single movement, plus the intuitive design ensures it is easy to use and rack - even with one hand. The horn on the spine of the karabiner helps prevent assisted braking devices from jumping onto the spine.

The Edelrid HMS Bulletproof Triple Eco is an innovative, robust HMS biner with steel insert at the apex. Prevents premature wear and burrs or sharp edges. It comes with a triple lock locking mechanism for maximum safety. Also makes a lighter alternative to a steel carabiner for top-roping.

The Edelrid HMS Bulletproof Screw FG Eco is an innovative and robust HMS karabiner with steel insert at the apex and an internal spring bar to prevent it from twisting. Ideal for use with EDELRID belay devices.