Non-Adjustable

The Petzl Jane-Y is a double progression lanyard that allows continuous connection during rope ascents. The plastic sheaths hold the karabiners in position and facilitate clipping while protecting the terminations from abrasion. It has a 60cm long arm and a 30cm short arm.

The Petzl's Jane uses dynamic rope and two sewn terminations but is stronger and less obstructive than a knotted lanyard. It can be combined with an Absorbica energy absorber to set up an energy-absorbing «I» or «Y» lanyard with a maximum length of two meters. The sewn ends are protected by a plastic sheath to hold the connector in place and protect the terminations from abrasion.

The Beal Dynaclip Rope Sling is a lightweight, compact dynamic lanyard designed for safe belaying and versatile climbing use. Its sewn ends and moulded sheath enhance durability and safety, while its dynamic rope construction offers superior energy absorption compared to traditional slings. Available in 40cm, 50cm, and 75cm lengths to suit indoor, sport, and multi-pitch climbing.

The Petzl Absorbica-Y is designed to be used for workers between the weight of 50kg to 140kg with 3 separate stages of stitching in order to allow for a more optimal deceleration at differing weights. It is a double lanyard with a compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and for passing intermediate anchors.

The Petzl Absorbica-Y Tie-Back is a double lanyard with integrated intermediate tie-back rings, a compact energy absorber and MGO connectors. Designed for vertical progression on very large structures and when passing intermediate anchor points, the Absorbica-Y Tie-Back works with users that weigh between 60 and 140kg. The Tie-Back system allows the user to wrap structures with very large cross sections. The arms are elasticized to avoid hindering progression and it's ready to use with two large-opening MGO connectors on the end of the lanyard and a Bm'D connector for harness attachment.

Available in a choice of colours and with lengths up to a maximum of 1.75m metres, these robust lanyards will provide a tough alternative to more traditional webbing versions. They are sure to find uses in every industry from adventure parks to powered access, rope rescue to renewable energy.

The Beal Dynapro-Air V Hook is a v-shaped arrest lanyard for work at heights with an integrated energy absorber which meets EN 355 and EN 362 standards.

The Lyon Rope Lanyard is available in a choice of colours and with lengths up to a maximum of 1.75m metres, these robust lanyards will provide a tough alternative to more traditional webbing versions. They are sure to find uses in every industry from adventure parks to powered access, rope rescue to renewable energy.

The Beal Dynapro-Air V Hook is a v-shaped arrest lanyard for work at heights with an integrated energy absorber which meets EN 355 and EN 362 standards.

Available in a choice of colours and with lengths up to a maximum of 1.75m metres, these robust lanyards will provide a tough alternative to more traditional webbing versions. They are sure to find uses in every industry from adventure parks to powered access, rope rescue to renewable energy.

The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.