Bolts and Anchors

The Fixe V-Belay Station is a belay Station (Type V), made in zinc plated steel for indoor use at climbing walls.

The Fixe D Belay Station Draco is made from 316L stainless steel, which is extremely durable and corrosion-resistant. Features a 33mm TIG-welded ring that minimises the risk of corrosion, a six link chain, two 12mm hanger attachment points and a key-lock nose Draco carabiner for smooth clipping.

The Fixe D-Belay Station is a strong, traditional bolt, anchor chain designed for any type of sport climbing route, outside. Consisting of two anchor points and featuring highly durable 316L Stainless steel to protect it from the elements.

The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.

The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

Expansion bolt for prospecting new routes and maintaining current routes.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Hang Fix expansion bolts have gone through a design phase focused on creating a technology which ensures expansion on an increased number of surfaces. Attention: On particularly soft rocks (such as sandstone) all expansion bolts are not recommended due to the unreliable nature of the supporting material.  In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).

The Raumer Rock Hanger (with 2 rings) has been entirely constructed in stainless steel, this combines a Rock Ø 10 bolt hanger with two round 10mm rings. This combination gives the rope in the lower ring complete freedom of movement whether the force is tensile or shear.

The Petzl Bat'Inox Anchor is a forged stainless steel glue-in bolt (pack of 10)