Features:Cam / lever mechanism fully integrated into the body;Self-cleaning cam that enables the functioning even on dirty or icy ropes;Fully adjustable webbing for the correct positioning on the boot;Reinforcement on the lower side with a tubular webbing;Ideal for working at height and tree climbing, it is equipped with an opening lever which allows you to keep the device open to facilitate Insertion of the rope and prevent it from accidental slipping out.
The Climbing Technology Quick'Up+ is a left or right-hand light alloy ascender handle with ergonomic rubber grip for climbing ropes.
Hand ascender that clamps to a rope to allow for easy climbing of a line when used in conjunction with a foot loop. Can be used for climbing, caving and access work. With over-moulded ergonomic gripper that provides a comfortable and powerful grip with one or two hands. A wide lower hole provides easy attachment of two carabiners for a lanyard and foot loop.
Designed for rope ascents, the Petzl Croll ventral rope clamp is simple to use, thanks to its pinch opening system, which is totally integrated in the clamp to avoid any involuntary snagging. The attachment holes ensure efficient positioning during ascents. It is available in two versions to adapt to different rope diameters.
The Petzl Pantin is a rope clamp that attaches to your footwear to aid in ascending ropes. The foot ascender can be used in conjunction with other rated clamps and ascenders to make climbing a rope quicker and more energy efficient.
The Petzl Pantin Catch is a catch for the Pantin foot ascender, it helps to keep the rope in the device during rope ascents. It's available for both the right and left foot versions.
The S.Tec Duck-R is a back-up device in the style of the Petzl Shunt but in this case it works only on one rope and has been certified for use in work at height scenarios rather than as descent back-up when climbing or caving.
The Heightec Pulsar (X-Cam) is a handled ascender for use in rope access. It has been found to be 25% stronger than its most popular sharp toothed competitor, with a breaking load of up to 675kg. Heightec X-Cam ascenders will significantly reduce the possibility of a complete system failure by exerting a considerable hold on a rope after the sheath has broken. It is available in both right and left handed versions.
The DMM Buddy is a fall arrest device designed for backup in industrial access situations. It's very easy to use and install on rope, providing essential safety backup.
The Petzl ASAP'Sorber works in conjunction with the Petzl ASAP or ASAP Lock, it's designed to rip along the stitching during a fall. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes
Established in 1977