Features:Shape provides additional protection options and the reduced width aids stability in shallow placements.Sizes 1–4 are made of a harder alloy to prevent shearing and size 5–11 are made of a softer alloy to improve bite.Size 7 features scooped faces to save weight.Single cable sizes 1-7 reduces weight.Hollow extrusion and dual thinner cable on the 8-11 to save weight.The combined weight of the 1-11 Halfnut sets are 42% lighter than the equivalent Wallnuts and they are similarly colour coded.Same taper angles and side profile as DMM’s tried and tested Wallnuts.Colour matched shrink tube for easy identification.
Specifications:Dimensions / Weight / Strength:Halfnut 1 (Purple): 6.7 x 7.2mm / 10g / 4kNHalfnut 2 (Green): 8.2 x 7.9mm / 10g / 4kNHalfnut 3 (Silver): 9.4 x 8.9mm / 15g / 6kNHalfnut 4 (Gold): 11.0 x 9.9mm / 16g / 6kNHalfnut 5 (Blue): 13.2 x 11.3mm / 18g / 6kNHalfnut 6 (Red): 15.6 x 12.8mm / 21g / 6kNHalfnut 7 (Grey): 18.9 x 14.3mm / 22g / 6kNHalfnut 8 (Turquoise): 22.3 x 16.6mm / 25g / 7kN Halfnut 9 (Gold): 25.2 x 18.7mm / 28g / 7kNHalfnut 10 (Silver): 28.8 x 22.0mm / 39g / 9kNHalfnut 11 (Green): 33.0 x 24.5mm / 46g / 9kN
Certification: EN12270:2013
The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.
The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.
The DMM Peenut are small offset nuts (available individually or as a 1 to 5 set)Â are specifically designed for flared cracks and shallow placements, but seem to fit everywhere. Found to be particularly effective on Cornish Granite. Now colour-coded for quick identification.
The Trango Ballnutz are clever camming devices that are not only quick to place, but also work in parallel sided placements where standard protection just won't work. They use a sliding ball-and-ramp that wedge against each other to hold in small parallel-sided cracks. Their holding power is so great that they provide excellent strength and fit where previously you could only hammer home a peg.
The long awaited micro cam from DMM is here! The Dragonfly Microcam device is an awesome piece of trad climbing rock protection that is lightweight, hardwearing and superbly flexible when placed. The narrow head and flexible stem make them the superior camming unit for limestone pockets but equally comfortable in granite and gritstone splitters. The size 1 Dragonfly is DMM's smallest certified climbing cam. The six cams in the range cover placements from 7.8mm – 28.3mm.
The DMM Chalk Bag is loose chalk that gives a good all over covering, effectively drying your hands and keeping them on the holds. The Crushed Chalk Bag is perfect for topping up chalk bags, filling boulder buckets, and replenishing our Chalk Tub.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes