The material used in the majority of anchors is now stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304. To highlight this change each article is stamped with the relevant symbols.
Specifications:Stainless Steel AISI 316L M8 - with BoltStainless Steel Bolt Hanger - "MINOX", with hexagonal M8 screw.Radial R = 22 kNExtraction R = 18 kNWeight: 48g
Best used in conjunction with SPIT-ROC M8 or stainless steel RAINOX M8 anchors (art.130).
The Raumer Super Tanka is very strong and allows rapid opening and closing of canyoning and caving sacks. Created in aluminium alloy, it can block two cords up to 6mm diameter simultaneously. It is resistant to cold temperatures and always guarantees that the sack is closed properly (and stays closed), which sometimes is not always ensured with a knot. Very convenient – once you’ve tried it there’s no going back!
The Raumer Handy allows the user to vary the descent simply by moving the rope into the narrow section of the karabiner, eliminating almost all downwards force. It is equipped with a stainless steel twisted ring which can be clipped into the semi-circular maillon on a harness, this ring makes this karabiner suitable for all speeds of descent on any type of rope.
The Raumer Alien Hanger is a stainless steel twist hanger for use with M8 bolts, primarily designed for aid climbing. Heavier than alloy hangers, although stronger and more appropriate for longer term placements.
The Raumer Ribbed Eyebolt has been designed as a departure anchor for the steel cable. This anchor is constructed in ribbed stainless steel Ø16 rebar. The length of the shank is 300 mm and should be completely fixed into the rock. When placing cables we recommend the use of a closed thimble on the cable itself.
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.
A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes