The DMM Belay Master Clip can be used in conjunction with many DMM karabiners (that can be bought in store), this device locks in place the karabiner, to prevent cross loading. It holds the karabiner and belay device in the correct alignment with the harness. This clip can only be locked if the screwgate has been properly closed, being another safety advantage. This small item will aid to make sure you never do your belay wrong!
The Fixe D-Belay Station is a strong, traditional bolt, anchor chain designed for any type of sport climbing route, outside. Consisting of two anchor points and featuring highly durable 316L Stainless steel to protect it from the elements.
The Fixe D Belay Station Draco is made from 316L stainless steel, which is extremely durable and corrosion-resistant. Features a 33mm TIG-welded ring that minimises the risk of corrosion, a six link chain, two 12mm hanger attachment points and a key-lock nose Draco carabiner for smooth clipping.
The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping. The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
The Raumer Hang Fix expansion bolts have gone through a design phase focused on creating a technology which ensures expansion on an increased number of surfaces. Attention: On particularly soft rocks (such as sandstone) all expansion bolts are not recommended due to the unreliable nature of the supporting material. In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.
The newest iteration of the Raumer Minox hanger is lighter, and has a larger hole for accommodating carabiners and attachments, all while maintaining the previous breaking strength. The polished finish allows for easy removal of mud and dirt (specific for caving), differentiating itself from matt grey hangers needed to mitigate visual pollution in outdoor areas.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes