Featurescam / lever mechanism fully integrated into the body;self-cleaning cam that enables the functioning even on dirty or icy ropes;fully adjustable webbing for the correct positioning on the boot;reinforcement on the lower side with a tubular webbing;ideal for working at height and tree climbing, it is equipped with an opening lever which allows you to keep the device open to facilitate insertion of the rope and prevent it from accidental slipping out.
When tested on new Tectra 11 mm low stretch rope, these handled ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads up to 675 kg for X-cams versus 535 kg for the established design.
Constructed with the latest range of Kong blockers. Providing an excellent ability to lock even on muddy and icy ropes. This is achieved by the holes on the cam. The opening lever is ergonomic and easy to use, protected from shocks and the risk of accidental opening. New materials and production methods provide a much higher surface hardness resulting in greater wear resistance and less fragility.
The Alp Design Avalon is a harness with padded large bands which make it extremely comfortable. It is also very light and has a low point of connection.
The Alp Design Bitex is a tough and durable caving oversuit. These caving overalls feature a tough Polyamide construction. The key wear areas are then reinforced with Cordura. The Bitex Caving suit is easy to get on and off due to the front opening, this is then secured by a Velcro closure. A small hood offers basic protection and this will roll into the collar when not in use. A small pocket is located on the lower left hand sided of the chest. The ankles of the suit have a straight finish but the wrists feature Velcro securing straps.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes