Phantom Quickdraw - 6 Pack

The DMM Phantom Quickdraws (6 Pack) are connected with a lightweight Dynatec Dyneema® sling, the Phantom quickdraw is a high performance trad onsight tool.
Also available as alpine quickdraws with an 8mm 60cm Dynatec sling.

Specifications:
Super-light quickdraw for minimum weight: Super-light carabiners are mounted on Dynatec to create quickdraws that minimise weight. These quickdraws are suitable for alpine climbing, trad onsighting, and any other scenario where minimum weight is desirable.
Small gate notches reduce snagging on equipment: Carabiners with wire gates need a gate notch to achieve their full strength rating. The notches on these carabiners are as small as possible while remaining functional, reducing the chance of them snagging on other equipment.
11mm Dynatec sling gives low weight and durability: Dynatec is strong and light, allowing thin and flexible slings to be used to connect carabiners. An 11mm Dynatec sling strikes a balance between minimal weight and durability, creating lightweight quickdraws that can withstand repeated use.
Wire gate carabiners reduce weight: Wire gates are the lightest gate type available, and are appropriate for trad, alpine and winter climbing, where minimal weight is desirable. They are less likely to freeze and clog with ice than solid gate biners, making them ideal for winter and alpine climbing.
I-Beam carabiner construction gives optimum strength to weight ratio: I-Beam construction techniques allow carabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality.
Contrasting carabiner colours identify rope and gear ends of quickdraw: Contact with wires and bolts can mark a carabiner with sharp edges that might be harmful to ropes. The carabiners on our quickdraws are differentiated by colour, allowing you to consistently use the same end for either protection or ropes.

Specifications:
Weight: 26g
Strength (gate closed): 23kN
Strength (gate open): 9kN
Strength (minor axis): 7kN
Gate opening: 22mm