ALF Climb Assist Locking Pulley

The Abtech Safety Ribbed Rope Protector is a large Canvas Rope Protector. Perfect for use when running ropes over edges. Plastic inserts add rigidity. Designed to protect your working rope from any abrasions when hanging over an edge, this Canvas Rope Edge Protector can prolong the life of your safety gear.

The Beal Absorb'Air is an energy absorber constructed of webbing, it is essential protection that's ideal for working at heights where there is a risk of falling. If a fall occurs, the inner webbing will tear to reduce the force and ensure the safety of the worker, For optimum safety, we use an easy to open semi-rigid pouch enabling users to inspect the condition of the entire length of the lanyard. For the same reason, each lanyard is marked with a unique serial number as well as a QR code for traceability.

The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners. For use with 7 to 13mm ropes.

The Petzl Nano Traxion is an ultra-lightweight (53g) and compact progress-capture pulley designed for rescue situations. It's sealed ball bearings provide excellent efficiency.