Nikwax Footwear Cleaning Gel
Breathable waterproof footwear is most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric or leather absorbs water, the breathability of the footwear will be reduced. Therefore, the Durable Water Repellency (DWR) of your footwear must be maintained to ensure comfort. Through use, the outer surface of footwear will pick up contaminants, such as dirt, which attract water, masking the effect of any DWR coating. Nikwax Footwear Cleaning Gel will remove contaminants and revitalise DWR.
Features:
Sponge-on and spray-on cleaner for all waterproof footwear
Cleans effectively, restores water repellency and revives breathability
Revives the performance of your footwear, keeping your feet warmer and drier
Recommended for Gore-Tex®, Sympatex® eVent® and all other waterproof footwear
How To Use:
Recommended for Gore-Tex®, eVent® & SympaTex® footwear.
1. Rinse item with clean water to remove loose dirt and to dampen surface.
2. Shake well before use. Press brush applicator to break seal or turn spray nozzle to 'ON' position
3. Apply generously over the area to be cleaned.
4. If very dirty scrub with a stiff nylon brush (e.g. nail brush).
5. Rinse well with clean water.
6. If required, apply appropriate Nikwax WaterBased waterproofing or conditioner while footwear is damp.
Note: Colour may run, test on a hidden area first.
Always allow footwear to dry naturally...
Leave footwear to dry at room temperature.
Paper can be stuffed into the toes to absorb excess moisture, this should be replaced when wet.
Keep footwear away from fires and radiators, drying too quickly can crack leather and cause bonded soles to peel.