Petzl Minder S1

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The Heightec Aluminium Rescue Pulley is a lightweight, compact swing cheek pulley for general or personal use. It features anodised aluminium alloy side plates for corrosion resistance and a nylon pulley wheel. Suitable for use with 13mm diametre or smaller rope.

The Fixe is a lightweight and compact pulley that is quick to install on the rope. Designed for use in hauling systems and deviations it offers a good balance between weight and strength. The Fixe has fixed side plates which allow for quick installation and coupling with a rope clamp. The 21mm aluminium sheave is mounted on self-lubricating bushings for greater efficiency.

This has special side plates for use with a prussik friction hitch. Large diameter sheave (51mm) mounted on ball bearings for low friction, high efficiency. The clipping slot is large enough to accept 3 typical karabiners. For use with 7 to 13mm ropes.

The Petzl Minder L1 is a very high efficiency Prusik pulley designed for heavy load rescue systems. Featuring a large diameter sheave, sealed ball bearings, and Prusik-friendly side plates, it delivers smooth and reliable performance for professional hauling and progress capture setups.

The Petzl Mini Traxion is an openable progress-capture pulleys that's been designed for use in hauling and rescue situations. This high-efficiency device allows rope to be installed while the pulley is connected to the anchor. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency (93%), whilst the cam can be locked in the open position so the device can be used as a simple pulley.

The Petzl Progress Adjust-I is a single adjustable progression lanyard. When combined with another lanyard, the Progress Adjust-I allows continuous connections for different types of progression, such as rope ascent or moving along a fixed line.