The Petzl Freino is a twist-lock karabiner that incorporates an integral braking system for improving friction on descenders and belay devices. Works extremely well with the Grigri when using slimmer ropes such as the Beal Booster, which can normally be a struggle. The Freino is ideal for adding or adjusting friction during descents.
Don't deal with a cross loaded belay karabiner again! The Black Diamond GridLock Screwgate is specifically designed for belaying, the Gridlock isolates the belay loop of a harness behind the uniquely shaped internal gate, thus keeping the karabiner in the correct orientation. The Gridlock is simple, easy to use and effective.
The Black Diamond RockLock Screwgate is BD's largest belay and rappel locker, the Black Diamond RockLock carabiner features a keylock nose, is Munter Hitch compatible and can be operated with one hand.
The DMM Belay Master is a belay karabiner that has safety at its heart. The nylon crossgate means that you can be sure that the screwgate is locked properly if the crossgate is closed. It stops the chance of the screw undoing and retains the karabiner in the correct orientation so not weakening of the system can occur.
The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.
The DMM Halfnuts excel in shallow placements, pin scars and situations where every gram counts. If they look familiar it’s because they have the same tapered faces and side profile as DMM’s tried and tested Wallnuts. The combined weight of the 1-11 Halfnut sets are 42% lighter than the equivalent Wallnuts and they are similarly colour coded.
The DMM Micro Wallnuts are for use in extremely narrow cracks where a normal Wallnut size 1 is too big. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes