The DMM Offset Alloy Nuts protect irregular and flared cracks that regular nuts cannot. Every size of Alloy Offset has a robust 12kN strength rating. The wires they are mounted on are set into a recess to reduce wear, while larger sizes have holes that reduce weight. Use in conjunction with Wallnuts for comprehensive all season crack protection.
Features:Asymmetrical taper gives stable placements in offset crack: Nuts with an offset taper protect cracks where normal nuts would not sit properly, such as flared cracks and peg scars. Use in combination with normal nuts to find security in almost any crack.Allows placement in two orientations for increased versatility: Passive protection can be placed either side or face on, doubling the number of cracks any single piece can protect.Grooved faces improve security in irregular rock: Wallnuts and Offsets have a groove machined into their faces, allowing them to sit better in irregular placements and on highly featured rock. This makes them more versatile across different rock types.Colour coded for easy size identification: The DMM protection range is colour coded for quick and easy size selection. Colours are co-ordinated across passive and active protection, for quick selection of alternatives if your first choice doesn’t fit.Passive protection works in wet and icy conditions: Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced.
Specifications:Number 7: 27g / 12kN / GoldNumber 8: 30g / 12kN / BlueNumber 9: 37g / 12kN / RedNumber 10: 45g / 12kN / GreyNumber 11: 56g / 12kN / light Blue
The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.
The long awaited micro cam from DMM is here! The Dragonfly Microcam device is an awesome piece of trad climbing rock protection that is lightweight, hardwearing and superbly flexible when placed. The narrow head and flexible stem make them the superior camming unit for limestone pockets but equally comfortable in granite and gritstone splitters. The size 1 Dragonfly is DMM's smallest certified climbing cam. The six cams in the range cover placements from 7.8mm – 28.3mm.
The DMM Dynatec 11mm Open Slings can be used for belays, running belays and to form a quickdraw using 2 karabiners, they are made with Dyneema® and rated at 22kN.
The DMM Dynatec 11mm Quickdraw Tapes are individual quickdraw extenders that can be used in between two karabiners to make a quickdraw. One end of the tape has a sewn-in 'tadpole' retainer of rubber which a karabiner can thread through and then clip onto the rope, making the karabiner less likely to spin or become cross-loaded by the rope in the event of a fall. The longer lengths are useful for trad climbing, particularly single rope use as there is less chance of rope drag and movement lifting out placed protection.
The DMM Wallnut Set is the backbone of every trad pack and an essential in building a comprehensive rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight.
The Trango Ballnutz are clever camming devices that are not only quick to place, but also work in parallel sided placements where standard protection just won't work. They use a sliding ball-and-ramp that wedge against each other to hold in small parallel-sided cracks. Their holding power is so great that they provide excellent strength and fit where previously you could only hammer home a peg.
The Wild Country Rocks are lighter than the Classic Rocks and feature a colour identification system which makes it easy to differentiate between sizes. They have a longer profile and a gentle side taper which helps with ease and security of placement. Now available in fourteen sizes and keeping their ground-breaking curved design, the Wild Country Rocks are the backbone of any good rack! Whether you're just starting or or a seasoned climber, you can't go wrong with a set of Rocks.
The Wild Country Rockcentric passive camming protection devices are a versatile piece of kit that suit every rack, whether you're a complete beginner or a seasoned climber. They are incredibly light, easy to use and offer plenty of placement options. They come with colour coordinated Dyneema slings that make it easy to identify the different sizes, whilst the slings themselves help to keep the devices firmly wedged once placed.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes