Features:All-round quickdraw for flexibility - All-round range are mounted on 11mm Dynatec to give quickdraws that can be used for sport, trad or winter climbing. Full sized karabiners are easy to handle when pumped or wearing gloves, while 11mm Dynatec is lightweight and robust. If you want one set of quickdraws to cover all your climbing, go for all-rounders.Mounted on 11mm Dynatec to balance low weight and durability - Dynatec is strong and light, allowing thin and flexible slings to be used to connect karabiners. An 11mm diameter sling strikes a balance between minimal weight and durability, creating lightweight quickdraws that can withstand repeated use.Wire gate karabiners for maximum weight saving - Wire gates are the lightest gate type available, and are appropriate for trad, alpine and winter climbing, where minimal weight is desirable. They are less likely to freeze and clog with ice than solid gate biners, making them ideal for winter and alpine climbing.Small gate notch reduces snagging - Karabiners with wire gates need a gate notch to achieve their full strength rating. The notches on these karabiners are as small as possible while remaining functional, reducing the chance of them snagging on other equipment.I-Beam construction for optimum strength to weight ratio - I-Beam construction techniques allow karabiners to be lighter without compromising strength. This is achieved through hot forging, a process which allows metal to be made into complex shapes that improve functionality.Contrasting karabiner colours identify rope and gear ends of quickdraw - Contact with wires and bolts can mark a karabiner with sharp edges that might be harmful to ropes. The karabiners on our quickdraws are differentiated by colour, allowing you to consistently use the same end for either protection or ropes.
Specifications:Spectre Quickdraw 12cm: Weight =75gSpectre Quickdraw 18cm: Weight = 77gSpectre Quickdraw 25cm: Weight = 80gGate Opening: 23mmCertification: EN 12275:2013 B / EN 566:2017
The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.
The DMM Dragon Cams feature a single stem, dual axle design that provides 360° flexibility and a substantial expansion range that increases performance in sub-optimal placements, therefor helping you get the right piece first time. Their striking TripleGrip cam lobes feature an increased contact area with a raw aluminium finish and additional bite points. These features work together to increase friction between the cam lobe and the rock it's placed in, increasing holding power and reduces walking.
The long awaited micro cam from DMM is here! The Dragonfly Microcam device is an awesome piece of trad climbing rock protection that is lightweight, hardwearing and superbly flexible when placed. The narrow head and flexible stem make them the superior camming unit for limestone pockets but equally comfortable in granite and gritstone splitters. The size 1 Dragonfly is DMM's smallest certified climbing cam. The six cams in the range cover placements from 7.8mm – 28.3mm.
The DMM Dynatec 11mm Quickdraw Tapes are individual quickdraw extenders that can be used in between two karabiners to make a quickdraw. One end of the tape has a sewn-in 'tadpole' retainer of rubber which a karabiner can thread through and then clip onto the rope, making the karabiner less likely to spin or become cross-loaded by the rope in the event of a fall. The longer lengths are useful for trad climbing, particularly single rope use as there is less chance of rope drag and movement lifting out placed protection.
The DMM Dynatec 8mm Open Slings are great keeping down the weight of your rack and are just as strong as their thicker variants. These skinny slings are particularly useful for narrow thread protection and they feature a plastic binding over the stitching for abrasion resistance. They are rated the same as the 11mm version (22kN).
The DMM Halfnuts excel in shallow placements, pin scars and situations where every gram counts. If they look familiar it’s because they have the same tapered faces and side profile as DMM’s tried and tested Wallnuts. The combined weight of the 1-11 Halfnut sets are 42% lighter than the equivalent Wallnuts and they are similarly colour coded.
The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.
The DMM Micro Wallnuts are for use in extremely narrow cracks where a normal Wallnut size 1 is too big. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes