All variants out of stock
Intuitive belay device with reliable blocking of the climbing rope. The first generation of the Smart belay device was successfully launched in 2009. Built on the experience the new Smart 2.0 offers significantly improved braking effectiveness as well as optimized geometry and intuitive handling. The newly developed brake insert blocks the rope in the event of a fall. The belaying action of the Smart 2.0 is the same as the previous model and is therefore tailored to the belayer's reflex movements.
FeaturesWeight: 80 gCut: BasicThe lightweight 80 grams Smart 2.0 is easy to operate and has no moving parts or levers.As it operates according to the tube principle, the Smart 2.0 is therefore suitable for both lead climbing and top rope climbing.In the event of a fall, the Smart 2.0 blocks the climbing rope, with the newly developed high-performance brake insert interacting with the belay carabiner. It therefore offers the belayer optimal support and significantly improved safety.Mammut recommends use of the Smart HMS for the Smart 2.0. It is suitable for rope diameters from 8.7 to 10.5 mm.
Rigging a ladder and lifeline pitch? No need to throw a strop with one of these around! Really useful for rigging a ladder or lifeline when there are no bolts or they look a bit suspect, these come in four different sizes and with a protector. As they provide two anchor points for a ladder, there is no need to add a Y-spreader into the system. We've also found them really useful for rigging practise SRT setups outside!
The Petzl Cordex are lightweight and durable belay/rappel work gloves with the precise fit and dexterity of a fine driving glove. High wear area such as the fingertips are protected by double-layered leather and the back is made with breathable, abrasion-resistant stretch nylon that provides comfort and fit. Low profile neoprene cuffs with Velcro closures feature a reinforced carabiner hole for attaching the gloves to a harness.
A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes
Established in 1977