Features:Easy to use:Simple, rapid installation and removal, without tools, allowing it to be reused (1)Locking function limits the risk of involuntary removalEasy clipping:The wide, ergonomic connection hole facilitates carabiner clippingThe width of the hole allows installation of two carabiners at the same timePrevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection holeHanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use(1) For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges.Specifications:Material(s): 316L stainless steelCertification(s): CE EN 795 B
The Air Leash Tool Carrier was designed to keep your tools attached throughout your operation. Its extendable spiral cord and tool holder head with keylock system are designed to connect them by cow hitch or choke knot. And even more practical, a ring allows the tool to be clipped onto the harness between uses.
The Beal Air Sit suspension seat is very stable thanks to the lateral triangulation of its two anchor points. Its comfort is reinforced by a durable, aerated foam. These characteristics make it ideally suited to working at height.
The air-step is designed to be easily adjustable even whilst wearing gloves thanks to its large buckle. Placing of the foot into the step is also facilitated by a stiffer bottom of the loop to hold its shape. The foot loop also has an on/off adjustment meaning that it will tighten up to the foot when in the on position, then in the off position the users foot is free to come out of the loop.
The Beal Commande bag is designed to hold small ropes and cords so has a small capacity. Made of resistant PVC, its bottom mesh helps gear dry. It also has an eyelet for attachment and a shoulder strap for carrying it.
The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.
The Petzl Connexion Fixe is a durable anchor strap with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. It is available in three lengths (100, 150 and 200 cm).
The Petzl Connexion Vario is a durable and adjustable anchor strap equipped with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. The strap length is adjustable, thanks to an adjustment buckle. A system keeps the remaining webbing stowed. It is available in two versions (30 to 200 cm and 200 to 400 cm).
The Petzl Pulse is a temporary 8mm anchor designed for caving suspension and equipment. Composed of an aluminium hanger and stainless steel shaft. The Pulse is quick to place or remove and allows for a more comfortable and safe practice.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes