Pro Traxion

The Beal Transf'air Fixe is compact and lightweight pulley with fixed side plates. It features a stainless steel axle and washer and the sheave is mounted onto a bronze collar to promote a good level of efficiency.

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Beal Transf'air Mini is a compact and lightweight pulley with swivelling side plate. Stainless steel axle and washer. The sheave is mounted onto a bronze collar to promote a good level of efficiency.

The Petzl Mini Traxion is an openable progress-capture pulleys that's been designed for use in hauling and rescue situations. This high-efficiency device allows rope to be installed while the pulley is connected to the anchor. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency (93%), whilst the cam can be locked in the open position so the device can be used as a simple pulley.

The Petzl Mobile is a compact and lightweight pulley for hauling systems and deviations. To increase efficiency the sheave is mounted on a self-lubricating bushing.

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).