Stainless steel AISI 316L bolt, ideal for use in climbing and mountaineering anchors.Weights:
66mm (art 156) - 49g86mm (art 157) - 60g110mm (art 150) - 75g
Extraction R = 21 Kn Radial R = 26 Kn
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
The surface allows for easy insertion of the rope and exerts the minimum damage to the sheath. As the pressure is spread over the full 360°, the wear on the ring is almost non-existent. Also used to equip improvised abseil stations using cordage and a bolt-chain-carabiner combination.
The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.
The wing plate is bent at 40° to allow easier clipping. The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes