Raumer
Action - CrMo Hammer
The Raumer Action - CrMo Hammer has two size 13 external hex drivers : one on the end of the handle and one set on the head. The handle’s base is fitted with a hex socket (size 13) and houses an innovative small spring-operated ejector piston for removing mud. Rubber coats the stainless steel shaft with 3mm cord (1.5m long) to secure it.
Raumer
M10 / M8 Adaptor
The Raumer M10 / M8 Adaptor is for self-drilling bolts (type SPITROC M8 – not in catalogue) and stainless steel RAINOX M8 (art. 130). Made with a stainless steel core and a case-hardened galvanised steel hexagonal body.
Raumer
Superstar P Anchor
The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.
Raumer
Rock Hanger
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
Raumer
Masterfix P Anchor
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.
Raumer
Tap
The Raumer Tap features a sophisticated design that guarantees perfect anchorage to the rock. It has very strong and tough teeth, so it is not necessary to use another Tap to complete the hole. These self-drilling anchors are used with the Stroker to manually drill a hole. Made with galvanized steel.
Discount Codes
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.