Features:Fast installation, extremely resistant, safe and reliable.low visibility installation.
Specifications:Extraction: 31 KNCutting: 25 KNWeight: 21 gr (body + cone)
Use with other types of cones, which may have unsuitable dimensions, may compromise the tightness of the anchor.Raumer Srl declines all responsibility for the use of TAP anchorage, especially in the event of incorrect installation.
Attention: before using the TAP anchorage, always read the attached technical sheet and the general information.Warning: the resistance values can change significantly depending on the type of rock considered and the incorrect infixion.Warning: always use the body of the TAP with the cone (item 720 A) supplied by the company Raumer Srl.
The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.
The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning. It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904). The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.
A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).
The Raumer Hang Fix expansion bolts have gone through a design phase focused on creating a technology which ensures expansion on an increased number of surfaces. Attention: On particularly soft rocks (such as sandstone) all expansion bolts are not recommended due to the unreliable nature of the supporting material. In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.
The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning. It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904). The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes