Products tagged with 'dmm nuts'

The DMM Protection Pack 3 is a great starter pack for anyone looking to get into trad climbing or just to top up their Up and Under Trad Pack! This set from DMM makes the perfect starting point for building a comprehensive climbing rack.

The DMM Protection Pack 1 is a great starter pack for anyone who wants to get into trad climbing or just as a top up to the Up and Under Trad Pack, see below on page.

The DMM Torque Nuts are designed to work in a similar fashion to Rockcentrics meaning they can be placed passively at a constriction or cammed into place in parallel cracks thanks to their offset edges. Additionally they are racked on extendable dyneema allowing the nuts to be neatly stowed on your harness and then extended when placed, eliminating then need for extra quickdraws. Four sizes are available covering a very wide range of large cracks.

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.

Despite their simple appearance, the DMM Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. The larger Wallnuts also feature hollow construction to reduce weight.