The Raumer Superstar Tool is a simple device that uses an SDS PLUS attachment and can be used with compatible drills to fix Raumer classic resin anchors (art.298-160-119) when using pre-dosed synthetic resin.
Weight: 160g
Using a hammer drill, the Raumer Masterfix Tool allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst. Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.
The Petzl Collinox Anchor is a forged stainless steel 10mm resin-in anchor ideal for coastal and damp rock placements when a 10mm gauge is sufficient.
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.
The Raumer Hang Fix expansion bolts have gone through a design phase focused on creating a technology which ensures expansion on an increased number of surfaces. Attention: On particularly soft rocks (such as sandstone) all expansion bolts are not recommended due to the unreliable nature of the supporting material. In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.
A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes