Rope Clamps

The SafeTec ENForcer-H is a non-aggressive device and during correct operational use it will not damage ropes. In emergency deployment with the exception of very minor glazing a properly used EN Forcer will lock on to the Back-Up rope without causing serious damage to itself, its lanyard, karabiners or to the rope.

The Croll Strap enables the Petzl Croll chest ascender to be used effectively in conjunction with a wide range of Petzl professional work at height harnesses. It allows the top of the Croll to be held in an upright position, close to the body, enabling the rope to run smoothly through the device thereby reducing 'lost' movement.

The Petzl Shunt works as a rappel back-up and is used below the rappel device. The Shunt replaces self-jamming knots like the Prussik and works on single and double ropes. The Shunt has smooth clamping surfaces which won't damage your rope. Designed for multi-pitch climbing and aid climbing the Shunt can also be used for mountaineering.

The Petzl Basic ascender is a lightweight, compact and multi-purpose ascender that works great for hauling systems, ascending fixed lines or as self-protection when climbing with a fixed rope. A self cleaning cam and angled teeth ensure a secure grip on the rope.

The Heightec Pulsar (X-Cam) is a handled ascender for use in rope access. It has been found to be 25% stronger than its most popular sharp toothed competitor, with a breaking load of up to 675kg. Heightec X-Cam ascenders will significantly reduce the possibility of a complete system failure by exerting a considerable hold on a rope after the sheath has broken. It is available in both right and left handed versions.

The Beal Monitor fall arrester has a swivelling side plate for ease of installation on the rope and to limit wear and tear. A lateral brake converts the Monitor into a rope clamp for work positioning. It can also easily follow the operator both up and down and lock in the event of a fall.

The DMM Buddy is a fall arrest device designed for backup in industrial access situations. It's very easy to use and install on rope, providing essential safety backup.

The ISC Rocker can be fitted to the rope at any point and can be used hands-free as a self-tailing device when travelling up or down the rope. The Rocker is designed for use without a shock-absorber and can be used as a Rope Adjuster or on a work positioning lanyard/Flipline, (In accordance with EN358).

The Petzl ASAP is a mobile fall arrest device with a unique locking system, an essential for anyone working at height. The ASAP will follow the user along the rope without any manual intervention, and in the event of sudden acceleration the ASAP will lock on the rope and stop the user. The ASAP is easily attachable and removable making it simple but effective for users.

The Petzl ASAP Lock is a mobile fall arrest device with the added function of a lock. The lock allows the user to immobilize the device to reduce the length of a fall. As with the Petzl ASAP, the ASAP Lock locks on the rope when it is shock loaded, stopping the user from falling any further. The connection arm makes the system loss-resistant when passing intermediate anchors. Please note, the ASAP LOCK must be used with an energy absorbing lanyard to work at a distance from the rope.

The Petzl Asap'sorber Axess is an energy absorber to be used to connect the ASAP or ASAP LOCK to the harness. It allows the user to keep the rope at a distance which can be useful to declutter the work area and keep the line away from sharp tools or hot metal. The fall absorption properties come from the tearing of stitches in the webbing reducing the impact force on the user.

Spare pouch for ASAP'Sorber Axess.

The Petzl ASAP'Sorber works in conjunction with the Petzl ASAP or ASAP Lock, it's designed to rip along the stitching during a fall. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.

The Beal Mobile Lanyard features 2 anchor points and is certified to work with the Monitor mobile fall arrest device, enabling it to be positioned away from the operator.

The Climbing Technology Quick Step A is an ascender for the right or left foot, when used in conjunction with an ascender handle (e.g. QUICK’UP+ or QUICK’ARBOR H) or a chest ascender (e.g. CHEST ASCENDER HC), makes it easier and speeds up the ascent of a rope.