The Fixe D-Belay Station 2 Draco is the form of anchor that is ideal for high-traffic single-pitch climbs, especially for beginners, because you don't have to untie yourself to abseil back down. On soft rock, such as sandstone, schists, margo-limestones, shales, and obsidian, glue-in bolts are recommended. For multi-pitch climbing, this setup is not advised.
Specifications:Breaking Load (kN): 25Weight: 660gDiameter of Hangers: 12mmStandard CEN: EN795:2012, EN959:2018Material: 316L Stainless Steel (outdoor use)
The Black Diamond Slinger Leash is a lightweight and elasticated single leash to tether your ice axe to your harness and keep it secure. Now with an aluminium locking carabiner for added security over the older steel snap-gate for clipping to your axe's head or spike, and polyester webbing which absorbs less water than the original nylon.
The Boreal Arwa is constructed out of modern synthetic materials, providing a super lightweight boot. Insulated by a full internal single layer of Thinsulate® lining - even on the sole to provide a real warmth even in the toughest conditions. The boot is suitable for all sorts of mountaineering from 4000m peaks, Scottish winter routes, alpinism and mixed and ice routes.
The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.
The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning. It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904). The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.
A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).
The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping. The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes