Products tagged with 'lanyard'

The Petzl Absorbica-Y is designed to be used for workers between the weight of 50kg to 140kg with 3 separate stages of stitching in order to allow for a more optimal deceleration at differing weights. It is a double lanyard with a compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and for passing intermediate anchors.

The Lyon Rope Lanyard is available in a choice of colours and with lengths up to a maximum of 1.75m metres, these robust lanyards will provide a tough alternative to more traditional webbing versions. They are sure to find uses in every industry from adventure parks to powered access, rope rescue to renewable energy.

The Lyon Adjustable Rope Lanyard is designed as a flexible connecting element for use within a work at height system (work restraint or work positioning). It is not to be used for fall arrest or in conjunction with an energy absorber. Conforms to EN 358.

The Beal Dynapro-Air V Hook is a v-shaped arrest lanyard for work at heights with an integrated energy absorber which meets EN 355 and EN 362 standards.

The Beal Dynaclip Rope Sling has sewn ends, ensuring belaying safety and is both lightweight and compact. The seams are protected by a moulded sheath for added safety and durability and it has a dynamic performance that's far superior to a conventional tape sling.

The Edelrid Switch Adjust is an adjustable self-belaying lanyard that's been made with energy absorbing dynamic rope. It is quick and easy to adjust using a rope clamp, even if under load and the large loop enables simple attachment to the harness using a girth hitch.

The Petzl Absorbica-Y Tie-Back is a double lanyard with integrated intermediate tie-back rings and compact energy absorber. It is designed for vertical progression on very large structures and when passing intermediate anchor points. It functions with users weighing between 50 and 140 kg. The Tie-Back system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. The arms are elasticized to avoid hindering progression.

The Petzl Absorbica-Y MGO is a double lanyard with integrated energy absorber and MGO connectors. It is designed for progression on a vertical structure or a horizontal lifeline, and for passing intermediate anchors. It functions with users weighing between 50 and 140 kg. It is available in two lengths: 80 or 150 cm versions (without connectors).