The Petzl Scorpio Eashook via ferrata lanyard is designed for users weighing 40 to 120 kg, in compliance with the EN 958:2017 standard. It is equipped with two Eashook carabiners with a wide opening that adapt to all hand sizes. The two retractable arms are equipped with an anti-twist system for more comfort.
The Beal Dynapark Y-Safety Lanyard consists of two strands of rope that are each 80cm long and made of dynamic rope with sewn-on endings. It is therefore much safer than static lanyards with a strength of 1500daN. For added safety, the karabiners can be attached to the lanyard with the Pinch attachment. To facilitate inspections, each lanyard has a unique identification number and can be fitted with an RFID chip.
The Scorpio Vertigo Wire-lock is a via ferrata lanyard designed for users weighing 40 to 120 kg. It is very compact, safe and easy to use thanks to the double action VERTIGO WIRE-LOCK carabiners on the two retractable arms. The gates open widely to facilitate easy clipping of cables or intermediate anchors, and it also adds greater durability for regular use.
The Beal DynaDoubleclip is a double dynamic rope lanyard with sewn endings for belaying and rappelling during big wall climbing and mountaineering. For added safety and durability, its seams are protected by a moulded sheath. It is lightweight, compact and is great for facilitating manoeuvres when rappelling, climbing or mountaineering.
The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.
The Beal Absorb'Air is an energy absorber constructed of webbing, it is essential protection that's ideal for working at heights where there is a risk of falling. If a fall occurs, the inner webbing will tear to reduce the force and ensure the safety of the worker, For optimum safety, we use an easy to open semi-rigid pouch enabling users to inspect the condition of the entire length of the lanyard. For the same reason, each lanyard is marked with a unique serial number as well as a QR code for traceability.
The Petzl Absorbica is a compact energy absorber, for use in combination with a Jane lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a zippered fabric pouch, the energy absorber is protected from abrasion while allowing for regular inspection. It has two options for installation on the harness according to the frequency of manipulation.
The Beal Mobile Lanyard features 2 anchor points and is certified to work with the Monitor mobile fall arrest device, enabling it to be positioned away from the operator.