Petzl
Coeur Bolt
The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning. It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904). The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.
Petzl
Corax
The Petzl Corax is a user-friendly and comfortable climbing harness ideal for both indoor and outdoor climbing. This adjustable harness comes in two sizes to accommodate various body types and is versatile enough for a range of activities, including mountaineering, via ferrata, gym climbing, and outdoor climbing. It boasts a wide waistbelt and padded leg loops for enhanced comfort, along with two rigid front gear loops and two flexible rear gear loops for gear organization.
Raumer
Radius P Anchor
The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.
Raumer
Rock Hanger
The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.
Raumer
Superstar P Anchor
The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.
Raumer
Wing Hanger with Ring
The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping. The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
Discount Codes
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.