Petzl Nano Traxion

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

The Heightec Aluminium Rescue Pulley is a lightweight, compact swing cheek pulley for general or personal use. It features anodised aluminium alloy side plates for corrosion resistance and a nylon pulley wheel. Suitable for use with 13mm diametre or smaller rope.

The lightweight Mini Prussik pulley can handle big loads but is small enough to take almost anywhere or be carried on the harness. The Mini features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. The aluminium sheave is mounted on sealed ball bearings which provides excellent efficiency.

The Petzl Ultralegere is one of lightest pulleys available at just 10g. The Ultralegere is s a simple nylon sheave that can be installed on a symmetrically shaped carabiner with ropes between 7 and 13mm.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.