Wing Hanger

The Raumer Action - CrMo Hammer has two size 13 external hex drivers : one on the end of the handle and one set on the head. The handle’s base is fitted with a hex socket (size 13) and houses an innovative small spring-operated ejector piston for removing mud. Rubber coats the stainless steel shaft with 3mm cord (1.5m long) to secure it.

The Raumer Alien Hanger is a stainless steel twist hanger for use with M8 bolts, primarily designed for aid climbing. Heavier than alloy hangers, although stronger and more appropriate for longer term placements.

The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The Raumer Rock Hanger (with 2 rings) has been entirely constructed in stainless steel, this combines a Rock Ø 10 bolt hanger with two round 10mm rings. This combination gives the rope in the lower ring complete freedom of movement whether the force is tensile or shear.

The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!