Bolts and Anchors

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).

The Raumer Europe Anchor is composed of a stainless steel AISI 316L Ø13mm ring, this product resembles and acts as a carabiner fixed perpendicular to the face.  Recommended for belays or for top-roping lower-offs as the 13 mm diameter surface makes it highly resistant to wear.  Please note that these anchors must be placed in pairs to ensure maximum safety.  One of the anchors must be used as a “passive” back-up, which also prevents the rope from twisting.

The Raumer Hang Fix expansion bolts have gone through a design phase focused on creating a technology which ensures expansion on an increased number of surfaces. Attention: On particularly soft rocks (such as sandstone) all expansion bolts are not recommended due to the unreliable nature of the supporting material.  In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.

The Raumer M10 / M8 Adaptor is for self-drilling bolts (type SPITROC M8 – not in catalogue) and stainless steel RAINOX M8 (art. 130). Made with a stainless steel core and a case-hardened galvanised steel hexagonal body.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

Using a hammer drill, the Raumer Masterfix Tool allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst. Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Ribbed Eyebolt has been designed as a departure anchor for the steel cable. This anchor is constructed in ribbed stainless steel Ø16 rebar. The length of the shank is 300 mm and should be completely fixed into the rock. When placing cables we recommend the use of a closed thimble on the cable itself.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The Raumer Rock Hanger (with 2 rings) has been entirely constructed in stainless steel, this combines a Rock Ø 10 bolt hanger with two round 10mm rings. This combination gives the rope in the lower ring complete freedom of movement whether the force is tensile or shear.

The Raumer Stroker Bolt Driver is a manual bolt driver made entirely from tempered and polished stainless steel.

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

When using a hammer drill, the Raumer Superstar Tool allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst. Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.

The Raumer wing hanger is ideal for equipping where the force applied is predominantly downwards.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The Stal SSTP is an independent and equalised stainless steel climbing wall anchors featuring low profile updated 'pucks'. Available in three configurations: stand-alone anchor, with two 10mm PPE stainless maillons for bottom roping or two captive bar Alpha Steel carabiners for lead anchor use.