Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Crux X1 Strike 2 Man Tent
Manufacturer:

Crux X1 Strike

Be the first to review this product
The Crux X1 Strike Tent takes the design of the X1 Raid but adds an extra pole. This adds slightly more rigidity to the tent but most importantly provides more space at headroom. The X1 Strike also offers more protection from the elements when the door is open, thus increasing comfort on longer trips. This is all achieved without increasing the footprint of the tent, so it still pitches easily in small spaces between boulders and is totally self-supporting for firm pitches on snow.

All variants out of stock


 

The Crux X1 Strike Tent, like all of the X1 range uses X-tex material. This means that unlike other single-skinned tents, when climatic conditions cause condensation to form on the inner wall of the tent, the X-Tex fabric actually absorbs the moisture which prevents dripping (a serious problem with single skinned tents). The fabric stays dry to the touch whilst absorbing moisture and continues to breathe at a significant rate, as it doesn't rely on water molecules remaining as vapour to pass through it.

X-Tex fabric uses a coating technology with activated carbon and introduces a new and quite revolutionary means of managing condensation which is greatly superior to conventional breathable membranes.

The tent itself is built around the same diagonal 2-pole, external pole-sleeve configuration as the X1 Raid, but features a third internal pole to create significantly more space at the head of the tent. This allows for easier entry/exit from the tent, and yields a more vertical door that reduces the exposure of the inside to the elements.

So what does this type of tent offer over other tents?
Single skinned tents are lighter than double skinned traditional tents, therefore you can get a tent that weighs little but you haven't had to pare the strength of the fabrics and poles down to achieve that low weight as you do with a double walled tent. So single skinned tents can be both light and strong at the same time.

Until now single skinned tents could only be used comfortably at high altitudes where the air holds little moisture so that the climate that you build up in the tent by breathing is able to be passed through the walls of the tent as easily as possible. Down in the valley in the U.K. for example where the air is generally moisture laden, your traditional single-skinned would be dripping all over you with condensation.

Features:
Central roof vent
Mesh panel in door
Diagonal poles inserted through external pole sleeves
Third internal pole for extra headroom
Eight guy points
Two internal pockets
Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
Supplied with 6 x alloy pegs, 4 x titanium pegs

Specifications:
People: 2
Total weight: 2010g (complete)
Tent body: 1345g
Poles: 485g
Bags, pegs, guys: 180g

Flysheet:    
Waterproof and breathable X-tex
132 g/m², 50 denier, polyester ripstop
10,000 mm hydrostatic head PU/activated carbon

Groundsheet:    
70 g/m², 40 denier, nylon 6.6 ripstop
10,000 mm hydrostatic head TPU coating

Poles: 3 x 8.50 mm Ø DAC Featherlite NSL
Guylines: 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length

Pegs: 
6 x DAC alloy V-pegs, 12 g each
4 x Titanium pegs, 7 g each

Packed size: 45 cm x 15 cm Ø
Made In: China

Dimensions:
Inner length: 210cm
Inner width: 120cm
Inner height: 100cm

*
*
*
*
*
 

The Crux X1 Strike Tent, like all of the X1 range uses X-tex material. This means that unlike other single-skinned tents, when climatic conditions cause condensation to form on the inner wall of the tent, the X-Tex fabric actually absorbs the moisture which prevents dripping (a serious problem with single skinned tents). The fabric stays dry to the touch whilst absorbing moisture and continues to breathe at a significant rate, as it doesn't rely on water molecules remaining as vapour to pass through it.

X-Tex fabric uses a coating technology with activated carbon and introduces a new and quite revolutionary means of managing condensation which is greatly superior to conventional breathable membranes.

The tent itself is built around the same diagonal 2-pole, external pole-sleeve configuration as the X1 Raid, but features a third internal pole to create significantly more space at the head of the tent. This allows for easier entry/exit from the tent, and yields a more vertical door that reduces the exposure of the inside to the elements.

So what does this type of tent offer over other tents?
Single skinned tents are lighter than double skinned traditional tents, therefore you can get a tent that weighs little but you haven't had to pare the strength of the fabrics and poles down to achieve that low weight as you do with a double walled tent. So single skinned tents can be both light and strong at the same time.

Until now single skinned tents could only be used comfortably at high altitudes where the air holds little moisture so that the climate that you build up in the tent by breathing is able to be passed through the walls of the tent as easily as possible. Down in the valley in the U.K. for example where the air is generally moisture laden, your traditional single-skinned would be dripping all over you with condensation.

Features:
Central roof vent
Mesh panel in door
Diagonal poles inserted through external pole sleeves
Third internal pole for extra headroom
Eight guy points
Two internal pockets
Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
Supplied with 6 x alloy pegs, 4 x titanium pegs

Specifications:
People: 2
Total weight: 2010g (complete)
Tent body: 1345g
Poles: 485g
Bags, pegs, guys: 180g

Flysheet:    
Waterproof and breathable X-tex
132 g/m², 50 denier, polyester ripstop
10,000 mm hydrostatic head PU/activated carbon

Groundsheet:    
70 g/m², 40 denier, nylon 6.6 ripstop
10,000 mm hydrostatic head TPU coating

Poles: 3 x 8.50 mm Ø DAC Featherlite NSL
Guylines: 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length

Pegs: 
6 x DAC alloy V-pegs, 12 g each
4 x Titanium pegs, 7 g each

Packed size: 45 cm x 15 cm Ø
Made In: China

Dimensions:
Inner length: 210cm
Inner width: 120cm
Inner height: 100cm

Product tags
Product reviews
*
*
Related products
Crux Torpedo 500

Crux Torpedo 500

The Crux Torpedo 500 is a waterproof sleeping bag that will make sure you sleep through the night on demanding trips. It uses the best quality, ethically sourced 850 fill down available to achieve superior warmth to weight ratio. This means that the bag is compressible and lightweight enough to carry in your pack on arduous climbs and trips. It has a comfort rating of 0C and lower limit of -6C (EN13537), meaning you can sleep in it anywhere, whether that be in a tent, snow hole, or ledge.

From £622.67 inc. VAT
Crux X1 Assault

Crux X1 Assault

The Crux X1 Assault takes the 3 pole design of the X1 Strike mountain tent but adds an external porch for storage, cooking and thus increased comfort. The tent has a relatively small footprint so that it will pitch in small spaces between boulders but the addition of the porch means that although the body of the tent is fully self-supporting the porch will need pegging out making it less friendly for use on snow.

From £845.41 inc. VAT
Crux X1 Raid Tent

Crux X1 Raid

The Crux X1 Raid is a simple and lightweight single-skin tent that can sleep two people. It's a conventional two pole, Bibler-style bivvy tent with a design that makes it great for serious high mountain use. It uses Crux's unique X-Tex fabric which uses a coating with activated carbon, this introduces a new and revolutionary means of managing condensation that's greatly superior to conventional breathable membranes.

From £622.67 inc. VAT
Aeropress Coffee Maker

Aeropress Coffee Maker

The AeroPress Coffee Maker delivers smooth, rich, low-acidity coffee in under a minute using gentle air pressure for a clean, flavourful brew. Lightweight, portable, and easy to use, it’s ideal for home, travel, and outdoor adventures.

£40.00 inc. VAT £35.64 inc. VAT
Jetboil MiniMo Cooking System

Jetboil MiniMo Cooking System

The Jetboil MiniMo Cooking System is powered by FluxRing technology that reaches a rolling boil in just over two minutes, and with half the fuel consumption of most traditional systems. Combining Jetboil's tried-and-true efficiency and versatility with a convenient form factor, the MiniMo is the perfect vessel for personal cooking and eating. Jetboil's proprietary regulator technology offers incremental heat adjustments from light simmer to full boil, perfect for sautéing greens, simmering sauces, and more.

From £164.22 inc. VAT
Jetboil Hanging Kit

Jetboil Hanging Kit

The Jetboil Hanging Kit is a great way to get your Jetboil system up and off the ground! It attaches securely to your Jetboil burner, making it easy to hang your stove when required. Ideal for use on big walls climbs, backcountry ski trips and expeditions, the hanging kit is suitable for use with the Zip, Flash, MicroMo, MiniMo, and SUMO cooking systems by Jetboil.

29%
off RRP
£55.00 inc. VAT £38.99 inc. VAT
Jetboil Flash Cooking System in Carbon

Jetboil Flash Cooking System

The Jetboil Flash Cooking System is a compact integrated stove and 1litre cooking pot unit. Ideal for boiling water for brews on the go and dehydrated meals. Packs small and is super efficient saving the need to carry spare gas. The system lights with a push of button and takes just over 2 minutes to provide 2 cups of water for coffee, instant soup etc.

£149.99 inc. VAT £133.15 inc. VAT

Discount Codes

If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.

Click here for more information on discount codes