Products tagged with 'dmm'

The DMM Dragon Cams feature a single stem, dual axle design that provides 360° flexibility and a substantial expansion range that increases performance in sub-optimal placements, therefor helping you get the right piece first time. Their striking TripleGrip cam lobes feature an increased contact area with a raw aluminium finish and additional bite points. These features work together to increase friction between the cam lobe and the rock it's placed in, increasing holding power and reduces walking.

The DMM Classic Rope Bag has the capacity to transport up to 80m of rope and accessories efficiently and comfortably, making it ideal for both the wall and crag. It has an internal tarp that is secured to the bag's interior with a Velcro attachment - this will keep your rope out of the mud and anything sharp when outdoors. It also features a handy zipped lid pocket for storing small essentials like your purse, wallet, phone or keys.

The Puma 2 is DMM's top of the range female-specific harness. This updated version has taken all of it's predecessors attributes and made them even better. The free-floating waist belt guarantees a good fit, whether you're at the top or bottom end of the size range (or if you need to add a few layers in the winter), you can be assured that your belay loop will always be central and the 7 gear loops (5 on XS and Small) are easily in reach.

The DMM Pivot belay device delivers confident belaying and effective stopping power whether used in guide mode, or belaying from the waist. Guide plates have traditionally been difficult to operate when lowering seconds. The Pivot's shackle reduces the force needed to initiate lowering, increasing control of the speed at which you lower your second.

The DMM Peenut are small offset nuts (available individually or as a 1 to 5 set) are specifically designed for flared cracks and shallow placements, but seem to fit everywhere. Found to be particularly effective on Cornish Granite. Now colour-coded for quick identification.

The DMM Nylon 16mm Open Slings are wider and heavier than the Dynatec slings and are a great option for beginners or use in outdoor activity centres. Although they are rated no higher than dyneema slings, there is more material involved and so they offer a greater safety margin when dragged over a sharp edge. The extra width may give beginners more confidence too.

The DMM Nutbuster is an invaluable tool for retrieving jammed gear. It features a rubber handle that gives a firm grip that lets you bash the Nutbuster to remove stuck protection. It can also be removed to reveal a 17mm spanner that lets you tighten loose bolts. The Nutbuster is laser cut from stainless steel for strength and corrosion resistance, with holes cut into it to minimise weight. A versatile and functional tool that every trad climber should carry.

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.