Rigging and Anchors

The ISC Tandem Pulley is an affordable pulley with a mid-sized trolley that uses state of the art engineering techniques to ensure that the trolley will run and run! These Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex.

The ISC Zippey Clip 'n' Zip Trolley has been manufactured from a high specification 4mm aluminium plate with a forged aluminium gate and stainless steel wheels, all of which offer the best weight to performance ratio on the market. The trolley weights 450g, with an MBS of 25kN and therefore exceeding the 2260kg rating required by US standards, as well as being fully CE approved.

The Lyon 30KN Nylon Sling with Protective Sleeve is the workhorse of their textile anchor selection. This option is fitted with a yellow textile over-sleeve for enhanced protection from light abrasion, dirt etc.

The Lyon Anchor Strop is a 7mm galvanised steel cable with plastic protective sleeve and eyelet ends. WLL 500kg, conforms to EN795B.

The Lyon Frixion SRB is a heavy-duty shear reduction block which offers greater friction than a conventional pulley, reducing the risk of uncontrolled descents. It is ideal for use in high ropes courses, climbing walls and for top rope belaying.

Designed as a temporary ground anchor for the restraint of personnel on cliff edges, or to provide a secondary means of support during stretcher carries on steep or slippery ground, the original Ground Pin Kit has become a 'standard' for rescue professionals operating in difficult, remote terrain.

The Lyon Ground Stake Linking Strap is designed specifically for the rapid creation of ground anchor systems when used in conjunction with the Ground Anchor Stakes.

The Petzl Coeur Pulse is a removable high-quality stainless steel anchor that can be installed and removed for reuse very simply and rapidly, without tools. The locking function limits the risk of involuntary removal.

The Petzl Connexion Fixe is a durable anchor strap with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. It is available in three lengths (100, 150 and 200 cm).

The Petzl Connexion Vario is a durable and adjustable anchor strap equipped with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. The strap length is adjustable, thanks to an adjustment buckle. A system keeps the remaining webbing stowed. It is available in two versions (30 to 200 cm and 200 to 400 cm).

The Petzl Jag System is an enclosed 4:1 progress capture pulley system that can be used for hauling, tensioning a system, pickoffs, making a releasable anchor, or evacuating a victim when paired with an I'D Descender. The Jag and Jag Traxion that create the system utilise sealed ball bearings to increase efficiency up to 91%, which with the 4:1 mechanical advantage, enable easier work to be done by the user.

The Jag Traxion is a progress capture double rope pulley that can be used in haul systems to provide mechanical advantage. Petzl have designed this Traxion specifically to work alongside the Jag double rope pulley so a 4:1 haul system can be created. Sealed ball bearing massively reduce friction, reducing the effort required when moving a load.

The Petzl Looping is a 4-step etrier designed for aid climbing and mountaineering but can also be used for multi-pitch climbing and caving. Wide, reinforced nylon webbing makes placing your feet easy while providing abrasion resistance.

The lightweight Mini Prussik pulley can handle big loads but is small enough to take almost anywhere or be carried on the harness. The Mini features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. The aluminium sheave is mounted on sealed ball bearings which provides excellent efficiency.

The Petzl Mini Traxion is an openable progress-capture pulleys that's been designed for use in hauling and rescue situations. This high-efficiency device allows rope to be installed while the pulley is connected to the anchor. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency (93%), whilst the cam can be locked in the open position so the device can be used as a simple pulley.

The Petzl Mobile is a compact and lightweight pulley for hauling systems and deviations. To increase efficiency the sheave is mounted on a self-lubricating bushing.