Rigging and Anchors

The Beal Pinch has been designed to help secure a karabiner in position at the end or a rope or tape lanyard, and constructed of tough, abrasion resistant material to provide protection against rock and concrete.

The SAR Products Twin Eye slings are made with a 18mm polyester superweb, and are rated to 24kN. This exceeds the standard set by EN354 of 22kN. 10cm & 20cm Twin Eye slings are used with the Rocker or as a short link lanyard in rope access.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

Everyone's favourite Pulley! The Triple Attachment Pulley by DMM forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).

Slightly larger than the Pinto and accommodating a larger rope size, the DMM Pinto Rig also has a high efficiency roller bearing giving ultra smooth operation. With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment.

The DMM Pinto Rig Spacer is an essential component for Pinto Rig applications where textile connecting elements tend to compress the side plates.

The DMM Pinto Spacer is an essential component for Pinto Pulley applications where textile connecting elements tend to compress the side plates.

The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on thier way around a High Ropes/Challenge course. It is also a protection solution for workers on towers, masts, Wind Turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working.

ISC lightweight Eiger Pulleys are made from high strength Aluminium and fitted with tamper-proof rivets.

The ISC HaulerBiner Compact Rescue System is a lightweight, compact and simple to use/deploy device. The HaulerBiner is fully rated for lifting people. It has three pulley wheels incorporated into each Karabiner, creating a compact and lightweight 6:1 or 7:1 (theoretical) Mechanical Advantage system. The HaulerBiner also has a purpose-designed progress capture cam with, an ‘on/off’ position. The HaulerBiner utilises purpose-developed 6mm (1/4") rope, for strength and easy handling/best grip. The kit is supplied in a two-pouch bag, for easy deployment.

The Fixe is a lightweight and compact pulley that is quick to install on the rope. Designed for use in hauling systems and deviations it offers a good balance between weight and strength. The Fixe has fixed side plates which allow for quick installation and coupling with a rope clamp. The 21mm aluminium sheave is mounted on self-lubricating bushings for greater efficiency.

The Gemini double pulley features special side plates which are designed for use with a Prussik friction hitch in lightweight progress capture systems. Designed with parallel mounted sheaves and an auxiliary attachment point for creating different types of hauling systems, even the most complex and technical of hauling systems.

The Jag is a double rope pulley used to reduce friction in the system making hauling more efficient. It can be paired with other pulleys to provide mechanical advantage, or with the Jag Traxion to create a progress capture 4:1 system.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.