Rigging and Anchors

The Beal Air-Port 8 Docking Point Multiplier can accommodate up to eight carabiners simultaneously. It has 20mm holes for easy turning, especially for those with a locking barrels. To ensure their traceability, each multiplier has a unique identification number.

The Beal Twist'Air B Pulley is a Compact aluminium swivel with ball bearings to optimise performance even when loaded. It has a ball bearing for efficient operation even under load and has an individual number which guarantees its traceability.

The air-step is designed to be easily adjustable even whilst wearing gloves thanks to its large buckle. Placing of the foot into the step is also facilitated by a stiffer bottom of the loop to hold its shape. The foot loop also has an on/off adjustment meaning that it will tighten up to the foot when in the on position, then in the off position the users foot is free to come out of the loop.

The Petzl Connexion Vario is a durable and adjustable anchor strap equipped with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. The strap length is adjustable, thanks to an adjustment buckle. A system keeps the remaining webbing stowed. It is available in two versions (30 to 200 cm and 200 to 400 cm).

The Lyon Frixion SRB is a heavy-duty shear reduction block which offers greater friction than a conventional pulley, reducing the risk of uncontrolled descents. It is ideal for use in high ropes courses, climbing walls and for top rope belaying.

ISC lightweight Eiger Pulleys are made from high strength Aluminium and fitted with tamper-proof rivets.

The Petzl Swivel Open provides both direct attachment as well as reduces twist and tangling of ropes and lanyards. The gates located on both sides of the swivel have a large opening, allowing the installation of a range of lanyards, fixed rope terminations, and fixed metal attachment points. The rotation of the swivel is aided with the maintenance free sealed ball bearings.

The Jag is a double rope pulley used to reduce friction in the system making hauling more efficient. It can be paired with other pulleys to provide mechanical advantage, or with the Jag Traxion to create a progress capture 4:1 system.

The Jag Traxion is a progress capture double rope pulley that can be used in haul systems to provide mechanical advantage. Petzl have designed this Traxion specifically to work alongside the Jag double rope pulley so a 4:1 haul system can be created. Sealed ball bearing massively reduce friction, reducing the effort required when moving a load.

Designed for use in rope access, the DMM Edge Hog fits through deck grating (commonly known as Kennedy Grating) which is found in many industrial situations such as oil rigs, chemical plants and refineries.

The Petzl Mobile is a compact and lightweight pulley for hauling systems and deviations. To increase efficiency the sheave is mounted on a self-lubricating bushing.

The ISC Fixed Wheel Single Prussik Pulley is a medium single prussik pulley with a fixed wheel in stainless steel. Can be used as a shear reduction pulley – Now CE Approved.

The ISC ZipSpeed-S Trolley is an affordable pulley with a mid-sized trolley that uses state of the art engineering techniques to ensure that the trolley will run and run! These Tandems are fitted with rubber sealed, deep groove bearings for optimal performance and a lifespan of several thousand miles/km. The side plates are made from Aerospace Grade 7075 Aluminium, to minimise flex.

Used with an ascension ascender (also sold on our website) for handled rope ascents. Made of 100% Dyneema for increased durability and ease of use. Simply step into the elastic loop with your foot for use, great with any type of shoe. Plate for adjusting foot loop length.

Everyone's favourite Pulley! The DMM Hitch Climber Triple Attachment Pulley forms an integral part of the renowned Hitch Climber System and is a firm favourite of working at height professionals the world over. The three hole construction makes rigging and organising much simpler and allows for off-centre hanging to minimise rope to pulley friction.

With hardly a straight line in sight, the hot forged curves and fairlead flares of DMM's Pinto Pulley make for an ultra efficient, ‘textile friendly’ environment. Clip, hitch, splice or thread the anchor holes or the becket to give numerous work and rescue configurations (textile attachments can help minimise any torsional build up in closed systems).