Petzl Fixe

The Heightec Aluminium Rescue Pulley is a lightweight, compact swing cheek pulley for general or personal use. It features anodised aluminium alloy side plates for corrosion resistance and a nylon pulley wheel. Suitable for use with 13mm diametre or smaller rope.

The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on thier way around a High Ropes/Challenge course. It is also a protection solution for workers on towers, masts, Wind Turbines and even in constrution applications where a cost-effective, temporary climb assist solution is required for short duration working.

The ISC Small Single Pulley has been made from high strength Aluminium and are fitted with tamper-proof rivets.

The Petzl Kootenay has a large diameter sheave on sealed ball bearings, providing good efficiency and rope care, and the high volume rope channel allows knots to pass through. The Kootenay also has the ability to be used as an anchor thanks the locking pins on the sheave.

The Petzl Mini Traxion is an openable progress-capture pulleys that's been designed for use in hauling and rescue situations. This high-efficiency device allows rope to be installed while the pulley is connected to the anchor. The large diameter sheave mounted on sealed ball bearings provides excellent efficiency (93%), whilst the cam can be locked in the open position so the device can be used as a simple pulley.

The Petzl Ultralegere is one of lightest pulleys available at just 10g. The Ultralegere is s a simple nylon sheave that can be installed on a symmetrically shaped carabiner with ropes between 7 and 13mm.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.