Products tagged with 'raumer'

The Raumer Europe Anchor is composed of a stainless steel AISI 316L Ø13mm ring, this product resembles and acts as a carabiner fixed perpendicular to the face.  Recommended for belays or for top-roping lower-offs as the 13 mm diameter surface makes it highly resistant to wear.  Please note that these anchors must be placed in pairs to ensure maximum safety.  One of the anchors must be used as a “passive” back-up, which also prevents the rope from twisting.

The Raumer wing hanger is ideal for equipping where the force applied is predominantly downwards.

The Raumer Ribbed Eyebolt has been designed as a departure anchor for the steel cable. This anchor is constructed in ribbed stainless steel Ø16 rebar. The length of the shank is 300 mm and should be completely fixed into the rock. When placing cables we recommend the use of a closed thimble on the cable itself.

The Raumer Rock Hanger (with 2 rings) has been entirely constructed in stainless steel, this combines a Rock Ø 10 bolt hanger with two round 10mm rings. This combination gives the rope in the lower ring complete freedom of movement whether the force is tensile or shear.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.