Wallnut

The DMM Brass Offsets are a crucial tool for protecting small flared cracks, they often fit perfectly into spaces nothing else will fit into. The brass used for the head of the nut is soft enough to bite into placements, but hard enough to resist deforming and pulling through. Wires are soldered directly into the nut head, allowing a thicker wire to be used and increasing overall strength. The colour coded swage gives easy size selection and allows the Brass Offset to self equalise when loaded, making the most of marginal placements.

The DMM Halfnuts excel in shallow placements, pin scars and situations where every gram counts. If they look familiar it’s because they have the same tapered faces and side profile as DMM’s tried and tested Wallnuts. The combined weight of the 1-11 Halfnut sets are 42% lighter than the equivalent Wallnuts and they are similarly colour coded.

The DMM Micro Wallnuts are for use in extremely narrow cracks where a normal Wallnut size 1 is too big. The large contact surface area of the Micro Wallnuts allows them to spread loads over a greater area of rock, decreasing the chance of the rock failing. They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock.

The DMM Wallnut Set is the backbone of every trad pack and an essential in building a comprehensive rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Wallnuts are highly featured pieces of climbing hardware. Different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight.

The long awaited micro cam from DMM is here! The Dragonfly Microcam device is an awesome piece of trad climbing rock protection that is lightweight, hardwearing and superbly flexible when placed. The narrow head and flexible stem make them the superior camming unit for limestone pockets but equally comfortable in granite and gritstone splitters. The size 1 Dragonfly is DMM's smallest certified climbing cam. The six cams in the range cover placements from 7.8mm – 28.3mm.

The DMM Dynatec 11mm Open Slings can be used for belays, running belays and to form a quickdraw using 2 karabiners, they are made with Dyneema® and rated at 22kN.

The DMM Dynatec 8mm Open Slings are great keeping down the weight of your rack and are just as strong as their thicker variants. These skinny slings are particularly useful for narrow thread protection and they feature a plastic binding over the stitching for abrasion resistance. They are rated the same as the 11mm version (22kN).

The DMM IMP Brass Nuts are invaluable for those pushing into harder grades and need to take advantage of all protection options. The brass alloy used in their construction means that the nuts lock into the rock incredibly well, whilst also resisting being pulled through the placement. These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.