All variants out of stock
The DMM Revolver Rig Twin has a uniquely profiled spine and captive bar aid in maintaining correct orientation.
The design of the Revolver Rig is such that when using a connector attached to the becket any friction between the connector and rope is minimised.
Features:Large sheave tread diameter for large bend radiusHigh efficiency roller bearingsFull strength becket accepts most connectors or direct textile connectionRemovable captive barDMM iD optionalKeylock nose for snag free operationUniquely profiled spine to aid correct orientation
The Beal Air-Hook is an auto-locking aluminium connector with a large opening and automatic locking. With its wide opening and automatic locking, the Air Hook connector is ideal for connecting to cables and bars. For greater comfort, its locking and unlocking trigger is anatomically designed. And to ensure their traceability, each connector has a unique identification number.
The Beal Be Lock is a large HMS carabiner designed for easy use with double (halves and twins) rope systems. The large surface area provides easy control in all weather. The Be Lock is particularly suitable for HMS belays and double rope manoeuvres, such as capstan or half-capstan.
The Beal Be Safe is a HMS screwlock karabiner that's perfect for use with belay devices as it can accommodate two ropes at once, without the risk of them becoming overlapped in the event of a fall. The reception cradle ensures that the two ropes slide together and does not generate friction on the sides of the carabiner when the rope is braked. This is true whether rappelling or stopping a fall.
The Beal O'Light is an oval shaped aluminium karabiner for use with equipment that has swivelling side plates. The shape of this karabiner is designed to easily connect double flange equipment such as pulleys, blockers and mobile fall arresters. It also has a keylock system and each carabiner has an individual number that guarantees its traceability.
The Beal Orient Express is a unidirectional locking carabiner designed for use with belay devices. Thanks to the internal snap gate that clips onto a harness belay loop, the carabiner cannot turn over. This ensures the carabiner stays in the correct direction thus reducing the risk of the belay system being weakened through cross loading.
The DMM Revolver is certified for use as both a karabiner and a pulley. It is the same as DMM's standard Revolver karabiner, but it features a locking gate which provides extra security. There is a small wheel in the rope location groove to reduce rope drag, allowing the rope to run more efficiently through the karabiner.
The DMM Revolver Rig is a connector with an integrated pulley sheave. Featuring a high efficiency roller bearing sheave(s), a threaded removable captive bar and a full strength textile friendly becket. The uniquely profiled spine and captive bar aid in maintaining correct orientation. The design of the Revolver Rig is such that when using a connector attached to the becket, any friction between the connector and rope is minimised.
A revolution in more ways than one! The DMM Revolver wire gated karabiner features a small wheel in the rope location groove. The result is a reduction in rope drag of up to 30%, which can, in effect, reduce the weight of your rope. A Revolver on your rack lets you reduce rope drag and make efficient mechanical advantage systems without the need for additional devices.
If you are a member of an outdoor or watersports group and have a discount code, please enter it in the box below.
Click here for more information on discount codes