Professional

The Pro Work 35 bag has an ergonomic foam back and comfortable adjustable shoulder straps. For durability, the adjustment buckles are made of metal and it has high frequency welds. Its bottom is also reinforced and for convenience, it features a side carry handle as well as an exterior customisation window for easy identification.

The Pro Work bag has a capacity of 45 or 60 liters, high frequency welds and a reinforced bottom, making it particularly suitable for heavy-duty carrying. For the user's comfort, a belt completes the ergonomic shoulder straps and the foam back. Their durability is ensured by metal adjustment buckles. The side carrying handle makes it easy to hold the bag.

The Beal Pro Work 35 Contract bag is a simple and robust bag. It has high frequency welds and a reinforced bottom. Its adjustment buckles are made of metal. For more practicality, it has a side carrying handle.

The Beal Commande bag is designed to hold small ropes and cords so has a small capacity. Made of resistant PVC, its bottom mesh helps gear dry. It also has an eyelet for attachment and a shoulder strap for carrying it.

The Beal Transf'air 2B is a highly efficient double pulley with ball bearing mounted sheaves, the swivelling action of the side plates allows the pulley to be positioned anywhere along the rope. Ideal for intensive use with large diameters ropes.

The Transf'air 1 pulley is a pulley designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope. The good performance is ensured by a sheave mounted on a bronze ring. Its durability is reinforced by a stainless steel shaft and washer. And to ensure traceability, each pulley has an individual number.

The Beal Transf'air Fixe B is a pulley with fixed side plates and ball bearings for optimal efficiency. Its compact and lightweight nature make it easy to handle. Allows a pulley system to be set up by adding a component such as an ascender.

The Beal Transf'air 1B pulley is designed for load deflection and hauling. Single pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Beal Transf'air 2B pulley is a pulley designed for load deflection and hauling. Twin pulley with a mobile flange, it is perfectly adapted to ropes with large diameters, the mobility of the flanges facilitating the positioning of the pulley at any point on the rope.

The Petzl MGO Open is a wide opening connecter for securing to larger diameter bars and cables. The auto locking mechanism makes using the MGO Open easy and convenient when crossing between structures and fixed attachments.

The Croll Strap enables the Petzl Croll chest ascender to be used effectively in conjunction with a wide range of Petzl professional work at height harnesses. It allows the top of the Croll to be held in an upright position, close to the body, enabling the rope to run smoothly through the device thereby reducing 'lost' movement.

The Beal Pro Rescue 60 is a bag designed for rescue operations with a 60m and 12.5mm rope and all the basic equipment. A webbing sling under the bag allows it to be guided from below if needed. In addition, a flap with a clear interior pouch lets you check the equipment.

The Beal Flat Link has been designed to go with the Hold Up harness and is a fully rated karabiner, making it ideal for full body harnesses. The flat surfaces ensure an even load distribution on webbing.

Designed to protect items inside the Genuis Bucket Plus from bad weather, dust etc.Fitted using clips. Can be used with the Genuis Bucket Plus (also stocked on this website), and designed to protect the contents of the bucket from rain, sleet, other bad weather, dust etc... Also works well to keep the items held within the bag when transporting or hauling.

The Beal Hold Up has an offset mounting hole offset at a 90° angle. This allows the rope clamp to remain vertical and flat for excellent fluidity during ascent. In addition, the low attachment on the harness increases the amplitude of each movement. And for even more comfort, the opening of the cam is facilitated by an ergonomic remote lever.

The Beal Attac'Tool allows for ferrous tools to be handily placed on the magnet for easy, quick access. Too be used in conjunction with leashes for tools as dropping of the tools is still a risk. The magnet can be placed in many different places such as on a chest harness or on the leg loops of the harness. The magnet is able to hold a tool weighing up to 188g.