Bolts and Anchors

The Raumer Wing Hanger is a sturdy stainless steel bolt hanger designed for secure anchoring where force is mainly downward. Moulded at a 40° angle for excellent load distribution, it features a discreet matt grey finish that blends into rock, reducing visual impact. Its clever design lets karabiners hang naturally for smooth top-rope setups, making it ideal for industrial, safety, or bolting uses where downward pull is key. Built from durable AISI 316L, it offers reliable performance while preserving the natural look of outdoor environments.

The Fixe V-Belay Station is a belay Station (Type V), made in zinc plated steel for indoor use at climbing walls.

The Fixe D Belay Station Draco is made from 316L stainless steel, which is extremely durable and corrosion-resistant. Features a 33mm TIG-welded ring that minimises the risk of corrosion, a six link chain, two 12mm hanger attachment points and a key-lock nose Draco carabiner for smooth clipping.

The Fixe D-Belay Station is a strong, traditional bolt, anchor chain designed for any type of sport climbing route, outside. Consisting of two anchor points and featuring highly durable 316L Stainless steel to protect it from the elements.

The Fixe Stainless Steel Hanger is made from either Ecotri Zinc-plated Steel for indoor use or 316L Stainless Steel for outdoor use. Both of which make for a super-strong optimised hanger for building anchors, ensuring full contact and constant pressure when fitting to reduce the chances of it moving.

The Petzl Coeur Bolt is a multi-directional hanger (with bolt) designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

The Petzl Coeur is a multi-directional bolt hanger designed for use in sport climbing, multi-pitch climbing and is also good for canyoning.  It is manufactured in three materials; Steel, Stainless Steel (316L) and HCR (High Corrosion Resistant) Stainless Steel (904).  The steel and stainless steel hangers are both available in 10mm or 12mm hole diameters.

Expansion bolt for prospecting new routes and maintaining current routes.

The Raumer Wing Hanger with Ring is bent at 40° to allow easier clipping.  The stainless steel AISI 316L round ring is 10mm in diameter. The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility. The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!

The shank is knurled; this method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The Raumer Rock Hanger is a hanger designed to comply with EN 795:2012, EN959:2007, and UIAA123. The hanger has a large hole allowing two carabiners to be attached at one time, has a matt grey finish to limit visual environmental impact, and is low cost in comparison to competitors. The material used in the Rock Hanger is AISI 316L, offers higher resistance to marine corrosion that the former AISI 304.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope.

The shank is knurled; This method of resin fixing has long been the most reliable and resistant, particularly when compared with resin anchors with transversal grooves or horizontal dimpled surfaces which are notoriously unreliable and dangerous! The anchor's eyelet can easily accommodate two carabiners simultaneously or a Ø10 mm folded and flattened rope. Matt grey to minimise environmental and visual impact.

The Raumer Hang Fix expansion bolts are high-performance climbing anchors designed to provide strong grip and reliability on hard rock surfaces like limestone and dolomite. Their advanced expanding collar ensures a secure hold, even on slightly weathered rock. Made from durable AISI 316L stainless steel, they provide excellent corrosion resistance for long-term use. Ideal for climbers seeking safe, dependable gear in tough environments.

A classic belay station seen at the top of many climbing routes. Made in Italy from AISI 316L Stainless Steel, this station will proves to be invaluable. To meet the requirements of the EN 959 the plate is to be used with its Hang Fix. We recommend the use of our Hang Fix stainless steel M10L (Art.157).

The Raumer Rock Hanger (with 2 rings) has been entirely constructed in stainless steel, this combines a Rock Ø 10 bolt hanger with two round 10mm rings. This combination gives the rope in the lower ring complete freedom of movement whether the force is tensile or shear.

The Petzl Bat'Inox Anchor is a forged stainless steel glue-in bolt (pack of 10)

The Raumer Ribbed Eyebolt has been designed as a departure anchor for the steel cable. This anchor is constructed in ribbed stainless steel Ø16 rebar. The length of the shank is 300 mm and should be completely fixed into the rock. When placing cables we recommend the use of a closed thimble on the cable itself.

The Raumer Europe Anchor is composed of a stainless steel AISI 316L Ø13mm ring, this product resembles and acts as a carabiner fixed perpendicular to the face.  Recommended for belays or for top-roping lower-offs as the 13 mm diameter surface makes it highly resistant to wear.  Please note that these anchors must be placed in pairs to ensure maximum safety.  One of the anchors must be used as a “passive” back-up, which also prevents the rope from twisting.

The Raumer Stroker Bolt Driver is a manual bolt driver made entirely from tempered and polished stainless steel.

The Raumer Action - CrMo Hammer has two size 13 external hex drivers : one on the end of the handle and one set on the head. The handle’s base is fitted with a hex socket (size 13) and houses an innovative small spring-operated ejector piston for removing mud. Rubber coats the stainless steel shaft with 3mm cord (1.5m long) to secure it.

The Raumer M10 / M8 Adaptor is for self-drilling bolts (type SPITROC M8 – not in catalogue) and stainless steel RAINOX M8 (art. 130). Made with a stainless steel core and a case-hardened galvanised steel hexagonal body.

The Raumer Alien Hanger is a stainless steel twist hanger for use with M8 bolts, primarily designed for aid climbing. Heavier than alloy hangers, although stronger and more appropriate for longer term placements.

The Raumer Anellox Sghembo is a revolutionary anchor, designed to be used with very long bolts like the Hang Fix bolts or screws Multi Monti. The form allows for a precise and comfortable housing of the bolt in the anchor, speeding up the work.

When using a hammer drill, the Raumer Superstar Tool allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst. Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.

Using a hammer drill, the Raumer Masterfix Tool allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst. Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.

The Stal SSTP is an independent and equalised stainless steel climbing wall anchors featuring low profile updated 'pucks'. Available in three configurations: stand-alone anchor, with two 10mm PPE stainless maillons for bottom roping or two captive bar Alpha Steel carabiners for lead anchor use.

The Stal SSTP Stainless Lead Anchor are independent and equalised stainless steel climbing wall anchors featuring low profile updated 'pucks'. Available in three configurations: stand-alone anchor, with two 10mm PPE stainless maillons for bottom roping or two captive bar Alpha Steel carabiners for lead anchor use.

The Stal SSTP Stainless Bottom Rope Anchor is an independent and equalised stainless steel climbing wall anchors featuring low profile updated 'pucks'. Available in three configurations: stand-alone anchor, with two 10mm PPE stainless maillons for bottom roping or two captive bar Alpha Steel carabiners for lead anchor use.

The Lyon Anchora offers five attachment points which are designed to allow different connecting and loading configurations. The attachment points provide a smooth bearing surface minimising wear on any connectors. The design allows positioning of the connectors and rope away from the structure, thereby prolonging the life of rope, connectors and surface of the structure.

The ClimbTech RB Anchor is one of Climbtech's most popular RB anchors, this portable concrete anchorage connector can be used in a variety of fall protection applications.

The Petzl Collinox Anchor is a forged stainless steel 10mm resin-in anchor ideal for coastal and damp rock placements when a 10mm gauge is sufficient.